Direct IP Idis DR-3108P Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Direct IP Idis DR-3108P. Direct IP Idis DR-3108P 17 stron.
Drukuj stronę● Record Video
Quality Setup
Higher recording quality
uses up more disk space.
● Finish the Quick Setup Wizard
Network Setup Wizard
After exiting from Quick Wizard, the network with
Network Wizard will start automatically.
● Start the Network Setup Wizard
● Internet
Connection
● LAN Setup
This test must be
performed before
proceeding to the next
step.
● FEN Setup
Enter the NVR name
registered on the FEN
server in the Device
Name field, and click
the Check to check its
availability.
● Finish the Network Setup Wizard
Camera Registration
Once Network Setup Wizard is complete, the system will
automatically enter Camera Registration mode and scan for
cameras connected to the NVR.
1
3
Camera Scan Button
1
Camera List Area
3
Apply/Cancel
5
Buttons
Camera Scan Button
Use this button to scan for and register cameras.
Pressing the Scan button displays the following submenu:
● Rescan: Scan for DirectIP™ cameras that were not
scanned automatically.
● Go To Camera: Moves the focus automatically to
the camera using MAC address of camera in the
camera list.
● Auto Detection: Activated in Live mode.
Automatically notifies the user of unregistered
DirectIP™ camera connections.
● Screen Auto. Assign: Assigns the detected cameras
on the video display area.
● Third Party Scan: Used to manually scan for third-
party cameras that cannot be recognized by the
auto scan feature.
– Protocol: Select the protocol used by the camera
(or video encoder) you wish to search for.
Even if the network device uses a protocol
supported by the NVR, the device itself may not
be visible for scanning and registration by the
NVR. For more information about supported
network devices and models, contact your
retailer.
2
4
5
Camera View
2
Buttons
Video Display Area
4
7