Xerox 721 Instrukcja konfiguracji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Drukarka Xerox 721. Xerox 721 20 stron. Software tools
Również dla Xerox 721: Instrukcja obsługi (11 strony), Uwaga dotycząca wydania (23 strony), Uwaga dotycząca wydania (8 strony), Podręcznik szkoleniowy dla klientów (50 strony)

COMMUNICATION PARAMETERS

This section lists the TCP/IP IP Address, Subnet Mask, and Default Gateway.

TCP/IP ENABLE displays ADVANCED when the 10/100 Ethernet Card/Port

on the controller (10/100/1000 Ethernet Card/Port for the YKE/YKE-N

controller) is activated at the Printer Control Panel.

CONTROLLER CONFIGURATION:

Notice that the type of controller and FreeFlow Accxes Firmware version are

listed in this section.

ADVANCED NETWORK STATUS: The Advanced Network HW Address is

the embedded NIC card and the address is used to redeem feature keys.

Status of the 10/100/1000 Ethernet Card/Port. READY shows that this is the

printer's currently active TCP/IP network interface. DISABLED shows that the

card/port is not enabled. The card/port must display READY in order to

support Scan-to-Net, document retrieval, and Web Print Management Tool

functions.

DDS ENABLE: When the DDS is enabled, the AccXES controller will

configure itself for use with a scanner. The YKE/YKE-N controller has DDS

automatically enabled. For the other controllers, this must be enabled in order

for the controller to communicate with the Scan System.

IMMEDIATE IMAGE OVERWRITE (IIO): provides for immediate deletion and

verification of image data no longer needed by FreeFlow Accxes. It has

minimal impact on print and copy times because only areas of the disk that

have been written are deleted and verified. Note that enabling IIO doesn't

provide security for previously processed images. For full deletion and

verification, On-Demand Image Overwrite is recommended in conjunction with

enabling IIO.

OPTIONAL CONTROLLER FEATURES:

This section lists the standard features, and which ones require a feature key

license in order to activate them. The following is a list of the optional feature

keys.

XEROX WIDE FORMAT Scan System Features:

Scan-to-Net Feature Key – to create an electronic file from a scanned

image.

Scan-to-Print Feature Key – to scan, create a preview, and send the

scanned image to the printer when the Scan-to-Net feature is present.

Color Enablement Feature Key – allows color scanning when the Scan-

to-Net feature is present. (shows in the Scanner Configurations section of

the test print)

Speed Enhancement Turbo II Feature Key – 4 inches per second (ips)

for 36" wide media. (shows in the Scanner Configurations section of the

test print)

Speed Enhancement Turbo III Feature Key –7.33 inches per second

(ips) for 36" wide media. (shows in the Scanner Configurations section of

the test print)

FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide