Xerox 82 Series Podręcznik użytkownika - Strona 40

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Drukarka Xerox 82 Series. Xerox 82 Series 44 stron. Wide format printer
Również dla Xerox 82 Series: Podręcznik wskazówek i porad (8 strony)

Drukuj stronę

4.2 LOADING ROLL MEDIA

Please follow the procedure below to install and load roll media.

Make sure the printer and Unwinder/Winder 100 are switched ON.

Step 1 :

Raise the pressure rollers of the printer.

Step 2 :

Open the front cover

Step 3 :

Make sure both unwinder (REAR) and winder (FRONT) unit are set to MANUAL mode.

Step 4 :

Consider the specifications of the printer before loading media:

Step 5 :

Maximum loading capacity

Maximum media width

For Spitfire 65", Rockhopper 3 65" and Viper 65"

For Spitfire 90", Rockhopper 3 90" and Viper 90"

Minimum media width

For Spitfire 65", Rockhopper 3 65" and Viper 65"

For Spitfire 90", Rockhopper 3 90" and Viper 90"

Inner core diameter

Remove the packaging of the media roll.

Step 6 :

Check whether the media is inside or outside printable. This affects the installation method on the

Step 7 :

unwinder at the rear of the machine.

Install the media between the two roll units at the back of the machine. Loosen the handles to

Step 8 :

move the roll units left and right.

4-2

For ValueJet 1604

50.8 mm or 76.2 mm

Metrical

100 kg

1625 mm

1653 mm

2280 mm

1000 mm

210 mm

Imperial

220 lb

63.98 in

65.07 in

89.76 in

39.37 in

8.27 in

2 in or 3 in