Xerox 8200N - Phaser Color Solid Ink Printer Instrukcja konfiguracji sieci - Strona 41

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji sieci dla Drukarka Xerox 8200N - Phaser Color Solid Ink Printer. Xerox 8200N - Phaser Color Solid Ink Printer 47 stron. Phaser color printer
Również dla Xerox 8200N - Phaser Color Solid Ink Printer: Specyfikacje (4 strony)

Drukuj stronę
NDS Tree (for NetWare 4.x NDS and later) is set for the correct NDS tree name.
I
NDS Context (for NetWare 4.x NDS and later) is set for the correct NDS Context.
I
Print Server (PServer) Name is set for the name selected for this Phaser printer to act as a
I
print server.
Novell Mode is correctly set.
I
6.
If any changes are made, reset the printer. Once the printer has been reset, allow the printer
approximately two minutes to go through self test, and then log into the network server.
7.
Print out another copy of the Configuration Pages to verify the items you modified were set and
retained.
Novell NetWare software step-by-step
1.
Verify that CentreWare DP and a Phaser printer driver have been loaded on the workstation.
In Windows 95, Windows 98, Windows NT 4.x, or Windows 2000/XP, double-click on
I
My Computer (you may have changed this name). Open the Printers folder to verify that
there is an entry for the type of printer you installed.
2.
Launch the CentreWare DP software.
In Windows 95 / Windows 98, Windows NT 4.x, or Windows 2000/XP, click on the Start
I
button and slide the highlight up to the Programs entry.
In the next fold-out window, slide the highlight up or down until you reach the
I
CentreWare DP entry. Release the mouse button to launch.
3.
If the desired printer's name appears, your printer is communicating through the network. Select
the desired printer. If a communications error message appears, your printer is not able to
communicate with your workstation. Verify your printer's settings, then return to this procedure.
4.
With the printer still selected, select the Printer drop-down menu and highlight the
Advanced Setup entry.
5.
Under this menu is a sub-menu for NetWare. Select this option.
6.
When the Advanced Setup dialog appears, verify the information contained on this screen against
the information contained on the Configuration Pages. Check for these items:
Check the queue name the Phaser printer is set to service. If necessary, create a new queue to
I
test the printer.
Primary Server has the server name listed on the Configuration Pages.
I
7.
Exit this window and select the Tools drop-down menu.
8.
Select the Send File... menu item.
9.
When the dialog box appears, select the proper directory and file for downloading. Be sure this is
a known valid file with no errors.
10.
Click OK to download the file to your printer.
11.
Check the printer to verify that the print job has printed. If the job has not printed, check the
Novell Menu settings on the Configuration Pages.
12.
At the CentreWare DP main screen, select the Printer drop-down menu. Highlight the Properties
entry.
13.
Once Properties is selected, highlight Connections.
Phaser® 8200 Color Printer
Novell NetWare 3.x/4.x/5.x Network
36