Direct IP Idis DR-4200P Series Skrócona instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Direct IP Idis DR-4200P Series. Direct IP Idis DR-4200P Series 17 stron.
Drukuj stronę
5
When user authentication window appears, enter the
User ID and Password set up on each device, and then
select OK for remote access.
6
Click Device Group on the Sites panel and click
the bottom. Add Device Group window will appear.
● Name: Enter a name for the device group.
● Location: Select an location for the subject device
group.
When you select a device from the device List on the
left, it will be added to the Selected Device List on
the right. Click OK to register the device group.
7
Make sure that the device has been added to the
device group correctly. Click Device Group on the
Sites panel and click on next to Device Group. When
you click on a registered device group, a list of devices
added the selected device group will be displayed on
the right.
To modify a device group that has been registered,
select a device group and click
the Sites panel. Modify Device Group window will
appear. You can modify the selected device group
from this window.
Live Video Mode
1
2
at
E
Recorded Video Playback
1
2
on the bottom of
E
In the Site List, make sure that the device has been
added to the device group.
In the panel tabs, click the Live tab. In the Site list,
select a zone you wish to connect to. Then, drag &
drop the selected site on the Live screen using your
mouse. The live video of the selected site will be
displayed on the screen.
In the Site List, make sure that the device has been
added to the device group.
In the panel tabs, click on the Play tab. In the Site list,
select a site you wish to connect to. Then, drag & drop
the selected site on the playback screen using your
mouse. The recorded video of the selected site will be
displayed on the screen.
13