Direct IP IDIS DA-PI PoE75U Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Direct IP IDIS DA-PI PoE75U. Direct IP IDIS DA-PI PoE75U 8 stron. Poe injector high-poe power source injector, 10/100/1000 mbps lan
Drukuj stronę
Installation
1
Connect the AC power cable to DA-PI PoE75U.
Make sure that the power LED (Green LED at the top) is lit.
2
Connect the Video In port of DirectIP™ NVR and Data In port of DA-PI PoE75U
using a UTP cable.
3
Connect the DATA & POWER OUT port of DA-PI PoE75U and network port of
DirectIP camera using a UTP cable.
4
Make sure that the camera is connected to power source and camera is connected to
the NVR.
Installation Layout
PTZ Camera
Types of Cables
UTP cable (Data + Power)
UTP Cable (Data only)
AC Power
AC power cable
5