Xerox Versant 80 Press Oczekiwania klienta i instrukcja instalacji - Strona 24
Przeglądaj online lub pobierz pdf Oczekiwania klienta i instrukcja instalacji dla Drukarka Xerox Versant 80 Press. Xerox Versant 80 Press 48 stron. Entry production color presses
Również dla Xerox Versant 80 Press: Podręcznik bezpieczeństwa (26 strony), Podręcznik bezpieczeństwa (45 strony)
Drukuj stronę
Detailed Specifications
Bi-Fold Capability
Paper type and weight
Uncoated
52-350 gsm
Coated
106-350 gsm
Fold Accuracy of Bi-Fold
(Lead and Side Edges)
Booklet Marker Finisher
Limitations
C/Z Folder
The C/Z Folder is available with these finishing devices:
Standard Finisher
Booklet Maker Finisher
Standard Finisher Plus
The C/Z Folder unit produces Tri-C fold, Z-fold, and Z-Fold half-sheet.
The C/Z folding tray accommodates 30 sheets of up to 24 lb. (64-90 gsm) uncoated media
Supported Paper size is 8.5 x 11 in (A4) to the bottom tray; 11 x 17 in (B4 and A3) to the top tray
Fold types, accuracy, and supported paper sizes are shown in the following table:
Z-Fold Half-Sheet Also known as:
Engineering Z-Fold
Accordion Fold
Accordion Fold-out
C-Fold Also known as:
Letter Fold
Tri-fold
Envelope Fold
Z-Fold Also known as:
Accordion Fold
Concordia Fold
SquareFold Trimmer Module
The SquareFold Trimmer is an optional finishing device that flattens the spine of a booklet and performs face trim of the booklet.
IMPORTANT:
It is available with the Booklet Maker Finisher; it is not available with any other finishing device.
For information related to the SquareFold Trimmer Module, refer to Module Dimensions for Optional Devices and Electrical Requirements for Optional Devices.
SquareFold Trimmer Specifications
Configuration
Auto Recognition of the
SquareFold Trimmer Module
Customer Expectation and Installation Guide
Bi-Fold (Single Fold) **Capability by weight, size and paper finish
A4 / 8.5 x 11 in
B4/8.5 x 14 in
1
1
•
Fold accuracy (lead and side edge): ≤2.5 mm
Bi-Fold: 1 sheet/set, 64-300 gsm uncoated stock, 106-300 gsm coated stock
•
Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stacker Tray.
•
Higher jam rates may occur when running 280 gsm and above, tabloid sheets to the Booklet Maker.
•
After cancelling a job sent to the Booklet Maker, empty the purge tray before submitting another print job. This will
ensure that purged sheets are not inadvertently inserted into the next booklet printed.
Feature
Paper Types and Weights
Paper Size
Trim Capacity
Trim Dimensions
This equipment is located after the Booklet Maker Finisher, and the operation is as follows:
Receives the booklet from the booklet maker unit
Transports the received booklet to the square-fold unit to flatten the spine of the booklet and then to the trimmer
unit to trim the face of the booklet
Deposits the finished booklet into the booklet tray.
The SquareFold Trimmer Module is also able to face-trim without square-folding. All output from the Booklet Maker Finisher
can be passed through, square-folded, trimmed, or both squared-folded and trimmed, including custom sizes from 210 x
297.4 mm-330.2 x 457.2 mm (SEF Letter through 13 x 18 in).
When the SquareFold Trimmer Module is docked to the Booklet Maker Finisher via cable, the finisher automatically
recognizes that the SquareFold Trimmer is installed.
Xerox Confidential
A3/11 x 17 in
1
1
1
1
Produces folded output ½ size of original:
B4 -> B5
A3 -> A4
11 x 17 in -> 8½ x 11 in
Produces folded output 1/3 size of original.
For stock sizes:
A4**
8½ x 11 in **
** Delivered to Envelope Folder
Produces folded output 1/3 size of original.
For stock sizes:
A4**
8½ x 11 in **
** Delivered to Envelope Folder Tray
Specification (with centerline paper)
52-350 gsm, Coated and Uncoated (18 lb. Bond - 110 lb. Cover)
Minimum: 8.5 x 11 in SEF (216 mm x 279 mm)
Maximum: 13 x 18 in SEF (330 mm x 457 mm)
520 sheets (90 gsm/24 lb.)
525 sheets (80 gsm/20 lb.)
2 mm-20 mm, adjustable in 0.1 mm increments
Xerox
Versant® 80 Press
®
12 x 18 in
SRA3
1
1
1
1
19