Xerox WorkCentre Pro C2636 Skrócona instrukcja obsługi

Note 1: This is a suggested testing procedure that requires

a working knowledge of DOS, and a program called

"Telnet.exe" or "Telnet.com".

Note 2: If the echo function of your telnet program is not

enabled, you will not see what you type at the DOS

command prompt. Please type slowly and carefully.

Fig. 1

Fig. 2

Open a DOS Command Prompt window.

Fig. 3

At the Command Prompt on the DOS screen type: "telnet" the

address

of the SMTP server with port number "25". Then press

Enter. The entry should display as in this figure.

Fig. 4

If you receive a

Connect

failed, repeat step Fig. 3 again. If it

continues to fail, please contact your IT Administrator or your

Internet Service Provider to obtain a working SMTP Server

Address.

SMTP Server Verificaton - 1 of 2

Fig. 5

If you receive a

ready

message similar to the one in this figure,

continue to the next step.

Fig. 6

Type

"ehlo

your e-mail

domain

name" and press Enter.