Xerox 3635MFP - Phaser B/W Laser Skrócona instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wszystko w jednej drukarce Xerox 3635MFP - Phaser B/W Laser. Xerox 3635MFP - Phaser B/W Laser 42 stron. Xerox phaser black-and-white multifunction printer
Również dla Xerox 3635MFP - Phaser B/W Laser: Cechy (1 strony), Broszura i specyfikacje (8 strony), Podręcznik oceniającego (17 strony), Dobrowolny szablon dostępności produktu (10 strony), Specyfikacje (4 strony), Instrukcja serwisowa (14 strony), Instrukcja serwisowa (39 strony), Aktualizacja oprogramowania (5 strony)

Drukuj stronę

Xerox 3635MFP - Phaser B/W Laser Skrócona instrukcja obsługi

•

On the Control Panel, press the Log In/Out button and then enter the

Administrator passcode [1111] and select Enter.

•

Press the Machine Status button then select Tools > Connectivity and

Network Setup > Advanced > Network Setting > Network Setup > TCP/

IP Options > TCP/IP Settings.

•

The allocated TCP/IP address is in the Name/Address field.

Confirm that an IP address has been allocated and that it is an appropriate IP

address for your network.

NOTE:

If the IP address starts with 169.xxx.xxx.xxx, the DHCP server has not

properly allocated an address or DHCP is not enabled on your network. Contact

your network administrator for assistance.

Network Setup Using a Static IP Address

Before you begin, obtain the following information from your network

administrator:

•

IP Address

•

Gateway Address

•

Subnet Mask

•

DNS Server Address

Press the Log In/Out button on the

Control Panel, enter the

Administrator's passcode [1111] and

select Enter.

Press the Machine Status button

then select Tools > Connectivity

and Network Setup > Advanced >

Network Setting > Network Setup >

TCP/IP Options.

Select HTTP and Enable. Select

Save.

Select TCP/IP Settings.

Select the Dynamic Addressing

button. By default, DHCP will be selected. Select Disabled to disable DHCP

and select Save.

Select Name/Address. Enter the Host Name, by selecting the Keyboard

symbol. Enter the IP Address by touching each box and entering the number

using the Numeric Keypad. Select Save.

Select Subnet and Gateway. Enter the Subnet Mask and IP Gateway. Select

Save.

If you do not wish to configure DNS settings proceed to the next step. If you

wish to configure DNS settings select the DNS Configuration button. Enter the

Domain Name and the Preferred DNS Server address. Select Save.

quick use guide