Xerox AltaLink B80 series Podręcznik

Przeglądaj online lub pobierz pdf Podręcznik dla Wszystko w jednej drukarce Xerox AltaLink B80 series. Xerox AltaLink B80 series 2 stron. How to load labels/special paper

Drukuj stronę

USdw

AltaLink B80xx Family: How to Load Labels / special paper

Labels: Ensure the Label or Envelope is properly loaded.

Choose the correct stock in the printer driver.

• Do not use any sheet where labels are missing, curled or

pulled away from the backing sheet.

Envelopes:

• Ensure the envelopes are loaded properly and within

specifications. Envelopes will run from the Bypass Tray or

Tray 1. See the Related Content section for additional

information about loading envelopes. Best results – use

optional Envelope Tray.

•The Envelope Tray can replace Tray 2.

• If envelopes are wrinkling, ensure the envelopes are within specification.

•If loading Envelopes long edge feed (LEF), select Landscape in the print driver.

Solution: Load & Print Labels

You can print labels from Tray 1, Tray 2 and for best results, Tray 5.

Guidelines for Printing Labels:

•Use labels designed for laser printing. •Do not use vinyl labels or dry gum labels.

•Do not feed a sheet of labels through the printer more than once.

•Print only on one side of the sheet of labels. Use full sheet labels only.

•Store unused labels flat in their original packaging. Leave the sheets of labels inside the original

packaging until ready to use. Return any unused sheets of labels to the original packaging and reseal it.

•Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing

them in extreme conditions can cause print-quality problems or cause them to jam in the printer.

•Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam

in the printer.

•In the print driver software, select Label as the paper type.

•Before loading labels, remove all other paper from the tray.

CAUTION: Do not use any sheet where labels are missing, curled, or pulled away from the backing sheet.

It could damage the printer.