Xerox 2101 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Copier Xerox 2101. Xerox 2101 22 stron. Digital copier/printer
Również dla Xerox 2101: Informacje o wersji dla klientów (14 strony), Podręcznik dla początkujących (12 strony)

1.2

Switch on the power of the copier before you begin copying. The server will then start automatically.

After the power is on, the machine will take about 7 minutes (for 100 V model) or 6 minutes (for 200 V, 220-240

V models) to warm up before you can start making copies. Switch off the power of the copier at the end of the

day, or when it will not be used for a long time. You can make use of the Power Saver feature if the copier is to

be left idle for a while. The Power Saver feature reduces the power consumption of the machine, thereby

helping to conserve energy.

"1.2.2 Saving Energy"

1.2.1

Switching On/Off Power

■

Switching on power

● If you switch on the machine

immediately after it has just been

switched off, it will take more than

five seconds to warm up.

● If you switch on the power, the copy

server will activate automatically.

"1.4 Entering Password"

● The Password Entry screen will not

be displayed if the Auditron Mode is

not enabled.

● If you made a mistake while entering

the password, press the Clear

button to clear, and then re-enter.

Switching On/Off Power

Procedure

Turn the power switch to

the "|" (On) position.

The server starts automatically

once the power of the copier is

switched on.

Enter the password (by department/user) by using the keypad

and then select Enter.

Each input digit is represented by an asterisk.

The message "Please wait for X minute(s)." (X refers to the numeric value) is

displayed.