Xerox D95 Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Copier Xerox D95. Xerox D95 14 stron. Printer and copier/printer
Również dla Xerox D95: Szczegółowe specyfikacje (8 strony), Specyfikacje (8 strony), Podręcznik użytkownika (32 strony)

Drukuj stronę

Xerox Secure Access

Installation Guide

Overview

This document describes how to configure the Xerox Secure Access Unified ID System

with a USB card reader. The USB card reader is connected directly to the USB port on

the Xerox machine. When the USB card reader is connected to the machine, a traditional

card reading device is no longer required.

Prerequisites

Xerox Secure Access unified solution: Xerox Secure Access server software version

4.1.0.3287 or higher

Equitrac

provider and libraries for USB card reader: EqXCPProvider,

LibforEqXCPProvider

Support card and cards readers: Please see Xerox Secure Access documentation on

supported card and card readers

Configuration: SSL (Secure Socket Layer) has to be enabled

Note

Extensible service setup has to be enabled if the EIP application is used.

Installation

Connecting the USB card reader

Two USB ports are located on the back of the Xerox machine. The two USB ports are

located next to each other.

Insert the USB connection from the card reader into the USB port on the right side.

Xerox

D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide