Xerox DocuColor 5750 Instrukcja serwisowa - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Copier Xerox DocuColor 5750. Xerox DocuColor 5750 40 stron. Digital color printer / copier
Również dla Xerox DocuColor 5750: Podręcznik referencyjny (8 strony), Podręcznik referencyjny (7 strony), Podręcznik referencyjny (7 strony), Podręcznik referencyjny (9 strony), Podręcznik uzupełniający (8 strony), Podręcznik dla początkujących (46 strony), Podręcznik uzupełniający (10 strony), Podręcznik (9 strony)

Drukuj stronę

Xerox DocuColor 5750 Instrukcja serwisowa

Introduction

This section contains status code proce-

dures. Each procedure represents a status

code, or group of status codes that may be

displayed, indicating a problem.

The status codes are numerical (e.g. 5-901),

with the number to the left of the hyphen indi-

cating the area of the machine and the

remaining digit(s) indicating a particular fault

to that area. Using the example of status

code 5-901, the ﬁrst number (5) indicates

that the fault has occurred in the ADF (Auto-

matic Document Feeder). A "10-106" code

would indicate a duplex jam.

To access the correct procedure, use the

section content page to locate the indicated

status code and the appropriate page num-

ber. The Status Code Entry Table is com-

posed of two columns. The left column

contains the status code fault indicator. The

right column includes a description of the

fault and the actions to take in resolving the

problem. The actions are the "most likely"

suspects. In each case, if you try to resolve

the fault and all attempts fail, you are directed

to call for service.

Anytime the fault code is not listed, or if you

are unable to clear the problem within rea-

sonable time you should call for assistance.

Always follow the Repair procedures care-

fully. Whenever directed, be sure to Switch

off the Main Power Switch and disconnect

the Power Cord.

5750 DocuCare Service Manual

Always Heed The Following Warning.... .

WARNING

Switch off the Main Power Switch, and

disconnect the Power Cord. Install Lock-

out tag. Failure to do so could result in

severe electrical shock.

5/98

2-3

Table 1. Fault Code Subsystems

Area

Description

User Interface

IOT

Machine Clock

ADF Failures

Scanning/ROS/Communica-

tions failure

Paper Trays

Paper Tray/Registration Jams

Developer/Toner/ADC

Fuser

Sorter

PWB Failure

PWB Read/Write Error

Fault Code Procedures