Xerox WorkCentre Pro 90 Podręcznik administracji systemem - Strona 27

Przeglądaj online lub pobierz pdf Podręcznik administracji systemem dla Copier Xerox WorkCentre Pro 90. Xerox WorkCentre Pro 90 30 stron. Pdl reference guide
Również dla Xerox WorkCentre Pro 90: Skrócona instrukcja obsługi (16 strony), Podręcznik zgodności (36 strony), Podręcznik użytkownika (24 strony), Instrukcja instalacji sieciowej (42 strony), Podręcznik referencyjny (22 strony)

Xerox WorkCentre Pro System Administration Guide Supplement

3. When the Overwrite Security screen displays, note which

of the two selection buttons is highlighted as the current

setting. The available settings are Enable and Disable.

a) To change settings, press Enable or Disable, then

press Save. To exit the settings screen, without

making any changes, press Cancel.

b) Press Exit Tools. If changes were made, the

machine will reboot automatically.

On Demand Overwrite from a WorkCentre Pro

Go to the WorkCentre Pro and...

1. Enter the Tools pathway.

a) Press the Access (

b) On the keypad enter 1111 or the current password.

Press Enter. The Touch Screen will be used for the

remainder of the data entry, unless instructed

otherwise.

2. Enter Overwrite menu

a) Press More. (up to 2 times)

b) Press On Demand Overwrite.

c) Press Start.

NOTE: A screen will appear to confirm that this procedure will

delete image data from the hard disks. Any existing jobs in the

queue will be deleted. The machine will be taken offline and

will be unable to receive any incoming jobs. Internet Services

will not be available until the machine reboots and comes

back online.

The On Demand Overwrite will overwrite all image data on the

hard disks. The process takes up to 20 minutes.

To cancel the overwrite procedure press Abort. Enter the

current administrator password. The overwrite procedure

may have already started at this stage. Press Back to

continue with the overwrite.

) button.

Page 1 - 15