Xerox 5400DX - Phaser B/W Laser Printer Podręcznik szybkiej instalacji - Strona 24
Przeglądaj online lub pobierz pdf Podręcznik szybkiej instalacji dla Akcesoria do drukarek Xerox 5400DX - Phaser B/W Laser Printer. Xerox 5400DX - Phaser B/W Laser Printer 40 stron. 1000-sheet stacker
Również dla Xerox 5400DX - Phaser B/W Laser Printer: Instrukcje techniczne (5 strony), Podręcznik (11 strony), Instrukcje instalacji (2 strony), Podręcznik papierowy (2 strony)
Drukuj stronę
Re-configuring an existing port
1.
Within the Printer Properties dialog box, click the Ports tab.
2.
Select the TCP/IP port you want to re-configure from the list
shown, then click the Configure Port button.
3.
A dialog box appears listing the current port configuration and
allowing you to make changes. The following settings can be
changed:
a.
Printer Name or IP Address
b.
Protocol (Raw or LPR)
c.
Raw Settings
d.
LPR Settings
e.
Bi-Directional Settings
4.
Click the OK button after the desired changes have been made.
Quick install steps (AppleTalk protocol)
1.
At the Desktop, right-mouse-click the My Network Place icon and
select Properties.
2.
Right-click the Local Area Connection icon inside the Network
and Dial-up Connections window. Select Properties.
3.
Select the General tab, and verify that AppleTalk Protocol is
loaded.
4.
If the AppleTalk software is not present, install it using the
documentation provided by Microsoft, and then return to this
document.
5.
Open the Control Panel and double-click the Printers icon.
6.
Double-click Add Printer; the Add Printer Wizard starts.
Click Next>.
7.
Click the Local Printer radio button.
8.
Click Next>.
9.
10.
Click the Create a New Port radio button.
11.
Select the AppleTalk Printing Devices from the New Port Type
pull-down menu.
18
Xerox Phaser 5400 Laser Printer