Xerox DocuPrint C3055 DX Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do drukarek Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 8 stron. Internal hard disk
Również dla Xerox DocuPrint C3055 DX: Instrukcja instalacji (16 strony), Podręcznik ustawień (33 strony), Podręcznik ustawień (20 strony), Instrukcja instalacji (16 strony)
Drukuj stronę
Korean.fm Page 3 Tuesday, August 22, 2006 8:53 AM
4.
5.
Important
• The font ROM should be installed parallel to the
controller board. The slot at the bottom of the
controller board is for a memory card (optional) which
is installed perpendicularly. Make sure to insert the
ROM in the correct slot.
6.
Note
• To remove the font ROM, push the retaining clips on
both ends in the outward directions and pull the ROM
out of the slot.
7.
8.
9.
The installation is now complete.
Note
• You can check whether the Korean font kit has been installed correctly by printing out the [PCL Font
List]. Refer to the Quick Reference Guide on how to print the [PCL Font List].
If a network expansion card is installed,
remove it temporarily.
Remove the two screws from outside of the
controller board. Hold the network
expansion card as shown in the figure and
pull it out forward.
Align the notch on the font ROM with the
projection on the ROM slot and insert the
ROM at an angle into the slot.
Pivot the font ROM toward the printer.
When inserted correctly, it clicks into place.
If you removed a network expansion card in
a previous step, re-install it into the
controller board.
Re-attach the rear cover on the printer by
tightening the two screws loosened in Step
2.
Plug in the power cord and switch on the power by pressing the power switch to the
<|> position.
notch
3