Xerox DocuPrint N24 Podręcznik funkcji - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik funkcji dla Akcesoria do drukarek Xerox DocuPrint N24. Xerox DocuPrint N24 15 stron. Xerox docuprint n24: supplementary guide
Również dla Xerox DocuPrint N24: Szybka instalacja (10 strony), Instrukcja obsługi materiałów eksploatacyjnych (2 strony), Instrukcje techniczne (10 strony)

Version 1.8

2/4/99

Power "OFF" then "ON" the Xerox DocuPrint N24/N32/N40 laser

printer. The User Interface should display "Ready".

6. To confirm upgrade is successful, refer to the section labeled

Determining a Successful Upgrade.

IF YOU HAVE PROBLEMS:

Make sure you are using an IEEE 1284 compliant cable.

Make sure the printer's parallel port time-out is set to Infinite Retry

(e.g. mode lpt1:,,p)

If running a DOS window from Windows 95, make sure that one of

your printers through Settings/Printers is mapped directly to LPT1 (not

re-directed to a network queue).

selecting the Port Settings button on the Details tab dialog. Make sure

the selection Spool MS-DOS Print Jobs is selected. If still having

problems after making these settings, try powering your PC off and on.

Windows 3.1x or 95 users: if experiencing time-outs on the host PC

("Problem detected on parallel port, Abort, Retry, Fail") then you need

to set the port to an infinite time-out against busy on the printer. From

the command line, or as an entry in autoexec.bat, type the following

command:

mode <port>:,,p (two commas following the colon)

The "p" option sets the port for infinite time-out. After setting the port

to an infinite time-out, try using the copy command again. If the

command prompt does not appear within 20 minutes, a ctrl-break can

be used to abort the copy command without rebooting your computer.

Windows 3.11 users should turn off Print Manager.

If the Token Ring option is installed on your printer, be sure to

disconnect the cable to the Token Ring card prior to downloading the

controller software via the parallel port and be sure to reconnect the

cable to the option card prior to rebooting the printer via the power

"OFF" and "ON" procedure.

In addition, consult the section labeled General Troubleshooting

Also check the port settings by