Xerox DocuPrint N24 Instrukcje techniczne - Strona 6

Przeglądaj online lub pobierz pdf Instrukcje techniczne dla Akcesoria do drukarek Xerox DocuPrint N24. Xerox DocuPrint N24 10 stron. Xerox docuprint n24: supplementary guide
Również dla Xerox DocuPrint N24: Szybka instalacja (10 strony), Podręcznik funkcji (15 strony), Instrukcja obsługi materiałów eksploatacyjnych (2 strony)

Step 32

Release the four clips (two on

the top and two on the bottom)

that hold the contact end cap to

the hopper. (See Photos 35 & 36)

Photo 35

Photo 36

Step 33

Using a small flat blade screw-

driver release the clip that

holds the seal exit port plug to

the hopper. (See Photo 37)

Remove the plug.

Photo 37

Photo 38

Photo 39

Photo 40

Photo 41

Photo 42

Xerox N24/32/40 Technical Instructions

Step 34

Using needle nose pliers grab the metal

toner agitator bar and pull it from the

agitator gear. (See Photo 38)

Step 35

Remove the agitator drive gear from the

side of the hopper. (See Photo 39)

Step 36

Using a cotton swab and alcohol clean

the seal area. (See Photo 40)

Step 37

Remove the backing of the seal and

apply the seal to the hopper.

(See Photo 41)

Step 38

Reinstall the agitator drive gear and the

agitator bar in the hopper. (See Photo 42)

NOTE: Make sure the agitator bar snaps

into position in the agitator drive gear.