Xerox DocuPrint N40 Podręcznik funkcji - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik funkcji dla Akcesoria do drukarek Xerox DocuPrint N40. Xerox DocuPrint N40 15 stron. Supplies/options
Również dla Xerox DocuPrint N40: Szybka instalacja (10 strony), Podręcznik uzupełniający (2 strony), Instrukcje techniczne (10 strony)

Drukuj stronę

Warning: Once the upgrade process has begun, DO NOT power off your

printer!

Version 1.8

2/4/99

PROCEDURE C

THE PARALLEL PORT

1. Print a Configuration sheet. Keep this page for future reference. For

directions on doing this, reference the section labeled Before you

Upgrade.

2. If your Xerox DocuPrint N24/N32/N40 printer's User Interface

displays "Ready" go to step 3. If a previous download attempt was not

successful and your printer is not "Ready", power the printer "Off"

then "ON" while pressing button 1 and button 5 simultaneously.

Continue pressing these two keys until the User Interface displays:

"Entering... Download Mode"

3. To send the upgrade file to the printer:

An OS/2 user should open a command prompt.

A Windows (95/NT/3.1x) user should run from DOS or run a DOS

session. For speed, it is recommended to exit Windows 3.1x and run

from DOS.

The format for the mode command is as follows:

mode <port>:,,p [RETURN] (two commas following the colon)Note:

This format is not valid under Windows NT.

The format for the copy command is as follows:

copy </b> <filename> <port>[RETURN]

Where:

</b> = binary file

<port> = the parallel port to which the printer is connected (LPT1:,

LPT2:, etc.)

<filename> = the path and name of the upgrade file

Ex: copy /b <filename> LPT1:

Wait until User Interface displays "Download Passed... Please

Reboot"