Xerox Phaser 750DX Instrukcja serwisowa - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Akcesoria do drukarek Xerox Phaser 750DX. Xerox Phaser 750DX 40 stron. Digital color printer / copier
Również dla Xerox Phaser 750DX: Specyfikacje (2 strony), Broszura i specyfikacje (4 strony), Podręcznik referencyjny (8 strony), Podręcznik (9 strony)

Drukuj stronę
Xerox Phaser 750DX Instrukcja serwisowa
Status
Code
10-366, 367
The control logic sensed that the Heat Roll temperature exceeded 180˚.
Initial action:
Check the Heat Roll Control Thermistor for cleanliness, damage and excessive wear at the point where the
Thermistor contacts the Heat Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-368
The control logic sensed an open circuit from the Pressure Roll control thermistor.
Initial action:
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-369
The control logic sensed an open circuit from the Pressure Roll overheat thermistor.
Initial action:
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-32
5750 DocuCare Service Manual