Xerox Secure Access Unified ID System Instrukcja instalacji - Strona 30

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do drukarek Xerox Secure Access Unified ID System. Xerox Secure Access Unified ID System 36 stron.

Drukuj stronę

Setting Up the Secure Access Hardware

6. Change the password used to access the Web Admin tool. You can reset the password at any time,

but ensure that you change the password from the default setting before the Secure Access system

is up and running.

7. In the Configure Xerox Secure Access Authentication Device section, choose Static IP from the

Addressing mode field.

8. Enter a static IP address in the IP Address field to set the address of this Authentication Device.

9. In the Configure Server section, enter the DCE Server's IP Address in the Server IP Address field.

10. Click the Update Configuration button located below the Configure Server fields.

11. Click the Restart link at the top of the page, then click "Click here to confirm restart" to restart the

terminal.

Repeat these instructions for each Secure Access Authentication Device that you are deploying.

Note:

Remember to reconfigure the laptop Internet Properties when you are done.

Xerox Secure Access Installation Guide