Xerox WorkCentre 6400 Podręcznik informacyjny - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik informacyjny dla Skaner Xerox WorkCentre 6400. Xerox WorkCentre 6400 44 stron. Color multifunction printer
Również dla Xerox WorkCentre 6400: Cechy (1 strony), Specyfikacje (1 strony), Skrócona instrukcja obsługi (17 strony), Podręcznik oceniającego (25 strony), Instrukcja instalacji (2 strony), Podręcznik konfiguracji (12 strony), Podręcznik oceniającego (24 strony), Skrócona instrukcja obsługi (17 strony), Skrócona instrukcja obsługi (16 strony), Skrócona instrukcja obsługi (16 strony), Podręcznik (32 strony)

Drukuj stronę
Xerox WorkCentre 6400 Podręcznik informacyjny
Foreign Device Interface (FDI)

2.2.4. USB Host Port

The WorkCentre 6400 contains a host connector for a USB flash drive, enabling upload of software upgrades and
download of network logs or machine settings files.
Modifying the software upgrade, network logging or saved machine settings files will make the files unusable on a
WorkCentre 6400.
The data in the network logging file is encrypted and can only be decrypted by Xerox service.
The machine settings that can be saved and restored by a service technician are limited to controller and fax
parameters that are needed for normal operation. For example, the fax address book can be saved and restored by a
service technician.
There is no method for a user, administrator or technician to move image data from the WorkCentre 6400 to a USB
device.

2.2. Fax Module

2.3.1. Purpose

The embedded FAX service uses the installed embedded fax card to send and receive images over the telephone
interface.

2.3.2. Hardware

The Fax module contains the fax modem and RJ-11 connector. The Fax modem implements the T.30 fax protocol.
The Fax module contains a CPU, BIOS, RAM, and Non-Volatile Memory.
Volatile Memory Description
Type (SRAM, DRAM, etc)
SRAM
Additional Information:
All memory listed above contains code for execution and configuration information. No user or job data is permanently stored in this location.
Non-Volatile Memory Description
Type (Flash, EEPROM, etc)
Flash
EEPROM
Additional Information:
All memory listed above contains code for execution and configuration information. No user or job data is stored in this location.
Ver. 1.00, May 2010
XEROX WorkCentre 6400 Information Assurance Disclosure Paper
Allows connection of optional access control hardware
Table 4 Controller External Connections
Size
User Modifiable
(Y/N)
128Kb
N
Size
User Modifiable
(Y/N)
512KB
via Diagnostics
16Kb
via Diagnostics
Table 5 Fax Module memory components
Function or Use
Executable code, control data
Function or Use
Set points, configuration settings
Set points
11
Process to Clear:
Power Off System
Process to Clear:
Diagnostic
Diagnostic
Page 11 of 44