Xerox 850N - Phaser Color Solid Ink Printer Podręcznik uzupełniający - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik uzupełniający dla Oprogramowanie Xerox 850N - Phaser Color Solid Ink Printer. Xerox 850N - Phaser Color Solid Ink Printer 26 stron. Installation guide for accxes 10.2
Również dla Xerox 850N - Phaser Color Solid Ink Printer: Specyfikacje (2 strony), Instrukcja obsługi (16 strony), Podręcznik uzupełniający (1 strony), Podręcznik uzupełniający (11 strony), Instrukcja konfiguracji (1 strony), Instrukcja czyszczenia (9 strony), Instrukcja aktualizacji (8 strony), Uwaga dotycząca wydania (33 strony), Uwaga dotycząca wydania (11 strony), Uwaga dotycząca wydania (11 strony), Instrukcje instalacji (2 strony)

Input Orientation

The title block can be located in the four different corners of the print as

shown in Figure 3. The number position is relative to the feed direction into

the Folder as indicated by the arrow. The title block position into the folder

may not be the same as viewed on the workstation because the file

orientation may have been changed to accommodate the print and fold

request. There can be many reasons for this, some of which are listed

below:

Print driver settings

Media available in the printer

Fold style selected

File orientation and size defined on the workstation

Rotation

The AccXES Controller using either bi-directional communications or finisher

file information will attempt to place the title block in the folder-preferred

location for the fold style selected. If the Controller positions the title block

correctly, the title block, in most cases, will be visible on the folded print.

PRINTER

Figure 3. Title Block Orientation into the Folder

XES Synergix 8825/8830/8855 Digital Solution Folding Supplement

FOLDER

feed direction

Depending on the fold style (fold program) selected, the folded package may

be delivered to the output catch bin with the title block either face down

or face up

. If a collation or reverse print order selection is available on

the print driver; it may be an appropriate selection to change the output.

When using ACT, the collation is based on the selected fold style and the

AccXES controller will determine the ordering of the prints.

Figure 4. Title Block Output Position

Title Block