Xerox C8 - DocuPrint Color Inkjet Printer Podręcznik - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik dla Oprogramowanie Xerox C8 - DocuPrint Color Inkjet Printer. Xerox C8 - DocuPrint Color Inkjet Printer 13 stron. European harmonic current notice
Również dla Xerox C8 - DocuPrint Color Inkjet Printer: Procedura czyszczenia (2 strony), Podręcznik dla początkujących (40 strony), Instrukcja obsługi (1 strony), Uwaga dotycząca wydania (26 strony), Zawiadomienie (1 strony)

recommended drilled papers due to interlocking of the sheets caused by dull punches. Paper jams

caused by plugs (the pieces cut out of the paper to create the holes) may be more frequent. Stacking

of GBC and VeloBind papers in the paper tray will not be as good as when using plain paper

because of possible interference of the punched holes in adjacent sheets. It is also important to note

that image quality will be highly dependent upon paper stock quality.

Pa p e r s w i t h a T e x t u r e d Fi n i s h

Papers with a textured finish have a surface contour, gloss, and appearance that affects toner

placement and image quality. One common example is paper with a linen finish. The smoothness or

roughness of the paper surface will significantly affect the results of the printed output.

Papers with a textured finish can be run on the DocuColor 8000 / 7000 with reasonable print quality

but will show the linen pattern. The peaks and valleys created by the textured finish may create areas

where toner cannot reach.

When using papers with a textured finish, run a smaller sample job before running long jobs to verify

whether or not the image quality meets your requirements. For best results, use low toner coverage

and avoid the use of photographs if fine detail is needed.

L a t e x -Sa t u r a t e d a n d Cl e a n Ro o m Pa p e r s

Clean room and latex-saturated papers refer to paper stocks that are saturated with latex and cut

under clean room (dust free) conditions. These types of papers are used frequently in the computer

chip industry and other industries where paper dust is unacceptable. Many people also like the feel of

these papers and their resistance to handling makes them an ideal candidate for paperback book

covers and other applications where surface strength is important.

Latex-saturated and clean room papers have not been optimized for color printing and do not have

many of the characteristics required to deliver premium image quality. These materials can run in the

DocuColor 8000 / 7000, however, image quality will be degraded. These papers are rough on the

surface and many actually have a finish (i.e., linen finish) that makes toner transfer difficult.

When using latex-saturated and clean room papers, only simplex printing is recommended.

Duplexing may be accomplished manually but automatic duplexing is not recommended. It is also

important to be aware that more service-related calls are likely due to possible contamination of the

feeding and transport modules.

En v e l o p e s

Even though some sizes are supported, it is not recommended to run envelopes through DocuColor

8000 / 7000 printers. Image quality is generally poor due to the quality of stocks used, and the

number of folded or overlapped edges. There is also an extremely high risk of machine

contamination due to the presence of the dry gum used for sealing. They cannot be run "closed" as

this creates more overlaps and often they become sealed from the pressure/ heat utilized in the

fusing process.

For more information on Genuine Xerox Supplies, call 1-800-822-2200 in the USA and 1800-668-0133 in Canada