Xerox DocuColor 7000AP Skrócona instrukcja obsługi - Strona 19
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Serwer druku Xerox DocuColor 7000AP. Xerox DocuColor 7000AP 26 stron. European harmonic current notice
Również dla Xerox DocuColor 7000AP: Informacje o wersji (36 strony), Podręcznik (13 strony), Zawiadomienie (1 strony)
Drukuj stronę
High Capacity Stacker 80 (HCS80)
High Capacity Stacker/Stapler (HCSS)/Common Stacker/Stapler (CSS)
1
2
Do c u Co lo r 70 0 0A P /8 0 00 A P Q u i c k Star t G u i de
Perform the following steps to clear the HCS80 jam
in the Bypass area and resume printing.
Remove any paper from the Top Tray.
1.
Lift the HCS80 Top Cover.
2.
Lift the green handle, or handles, indicated on
3.
the UI and remove all paper in the Bypass
area. Remove paper only from the areas
indicated.
Close each green handle.
4.
Close the HCS80 Top Cover.
5.
6.
If the UI indicates there is a jam in the digital
press, follow the instructions on the screen to
remove any paper in the area indicates. Refer
to the Jam Clearance section in the Problem
Solving chapter in this manual.
7.
Follow the instructions displayed on the
digital press UI to resume printing.
Read the following steps for more information on
how to clear a jam.
Open the finisher Front Door. There are three
1.
possible jam areas. Handle 1 moves down,
handle 2 moves to the right, and handle 3
moves up.
2.
Remove all jammed paper only from the area
indicated on the Touch Screen and the
finisher Control Panel Display. Do not remove
paper from any other areas.
3.
Reposition the handle.
3
Close the finisher Front Door.
4.
Follow any instructions on the Touch Screen
5.
to restart your print job.
Exercises
15