Xerox F110MB Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Faks Xerox F110MB. Xerox F110MB 4 stron.

Drukuj stronę

Installation Guide

Document Input Tray

Insert the document input tray into the

two openings in the cover. Th e document

support should snap securely into place.

Loading Paper

Before your machine will be ready to make

copies or receive faxes, you must load paper

into the machine. Use paper letter, 8.5 x 11

Inch (216 × 279 millimetres). Your machine

works with normal copier paper and with

typewriter paper (0.13 – 0,2 lb/m

user manual chapter Installation / Paper).

Separate the paper sheets by fanning

them out, then align them by tap-

ping edge of the stack lightly against

a ﬂ at surface. Th is will prevent several

sheets of paper from being drawn in

all at once.

Remove the cover from the paper tray.

Put in only as much paper as will ﬁ t

under the raised limit markers on the

upper edge of the paper input tray

(see also the drawings on the cover

of the paper input tray). You can load

up to 250 sheets into the paper input

tray.

Paper Output Tray

Pull the paper output tray out of the paper

tray cover.

Cover

) (see

Press the paper down until the lever

(A) snaps into place at the rear of the

paper input tray.

Document Output

Tray

Insert the document output tray into the

two openings under the operation panel.

Document input tray

Document guide

Document feed slot

Paper input tray

Opening for

Plug'n'Print card

Place the cover back on the paper input

tray. Push the paper input tray into the

machine all the way to the stopping point.

Operation panel

with LCD display

Document

output tray

Paper output tray

(extendable)