Direct Supply Attendant Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt medyczny Direct Supply Attendant. Direct Supply Attendant 12 stron. Pen light
Również dla Direct Supply Attendant: Instrukcja obsługi (2 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (2 strony), Instrukcja obsługi (2 strony), Instrukcja obsługi (2 strony), Instrukcja obsługi (2 strony)

Before each use, verify the device is undamaged and

properly functioning. Do not use the device if you suspect it

may be functioning incorrectly.

Recommended environmental conditions:

• F or use: Temperature between 50°F and 100°F, relative

humidity below 85%

• F or storage: Temperature between 0°F and 150°F, relative

humidity below 85%

Cleaning a nylon cuff with bladder:

• F irst, gently remove the tubing from the inflation bulb

and gauge. Place these aside. Before cleaning, the

bladder must be removed. To remove the bladder, gently

pull the tube through the cloth opening then pull the

bladder out of the cuff. The bladder can be wiped clean

with a damp cloth. The cuff may be cleaned using a damp

cloth or by washing with warm water and mild soap or

detergent. Allow the cuff to air-dry.

Manometer gauge:

• Y our Direct Supply Attendant Mobile

Sphygmomanometer is designed to provide accurate

blood pressure measurements within ±3 mmHg across

the range of normal use (20-300 mmHg). Gauge accuracy

should be checked periodically. To do this, ensure that

the needle lies in the small black rectangle at the bottom

of the gauge when the cuff is deflated. If it does not,

discontinue use of the device and contact Direct Supply.

Customer service contact information can be found in the

Customer Service section of this Owner's Manual.

Care and Maintenance

1-800-634-7328

directsupply.com

■