Direct Supply Panacea TILT CHAIR Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wózek inwalidzki Direct Supply Panacea TILT CHAIR. Direct Supply Panacea TILT CHAIR 16 stron. Weight capacity standard: 350 lbs.; bariatric: 450 lbs.
Drukuj stronęLap Tray
The chair has a depth-adjustable, detachable lap tray accessory.
To attach the tray:
• Pull down and rotate the release pins located under the armrests. Rotating the pins will lock them
into an "open" position (Figure 12).
• Unfold the rods from the brackets on the underside of the tray (Figure 12).
• Insert the rods into the tubes located directly underneath the arm pads (Figure 12).
• Once the tray is in the desired position, secure it into place by unlocking the release pins. Ensure
the tray is securely locked into place.
To remove the tray:
• Pull down and rotate the release pins located under the armrests.
• Slide the rods out from the tubes located directly underneath the arm pads.
• Once the tray is removed, fold the rods back into place on the underside of the tray.
• Rotate and release the pins back into the "closed" position.
• If the chair is equipped with a rear storage compartment, place the tray into the top pocket of the
storage compartment.
• WARNING: The chair should never be placed into a tilt position while the lap tray is in use.
• WARNING: Do not use the tray if any deformation, breakage or other defect is discovered. The
tray should be inspected regularly for any deformation, breakage, compression, corrosion or wear.
• WARNING: The tray should be regularly cleaned and maintained to ensure its appearance
and function.
10
Operating Instructions
Figure 12
(cont.)