eControls Comfort365 C365C32 Podręcznik instalatora - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik instalatora dla Termostat eControls Comfort365 C365C32. eControls Comfort365 C365C32 8 stron. Wiring hub, model wh11 and wh32
Również dla eControls Comfort365 C365C32: Podręcznik instalatora (4 strony)

Drukuj stronę

WIRING INSTRUCTIONS

Warning!
Turn the power to the HVAC equipment off before wiring.
Wiring Thermostat to Wiring Hub
Use 5-conductor(1 spare), 18 or 20 gage, thermostat cable.
C365
Wire Color
Terminal
5V
Red
GND
White
SA
Blue
SB
Yellow

WIRING DIAGRAM

Wiring Hub Model WH11 or WH32
EQUIPMENT
+5V
GND
SB
SA
C365C32
Thermostat Model C365C32 or C365C32WF
Wiiring Hub
Function
Terminal
5V
24VAC Power
GND
Common
SA
Signal A
SB
Signal B
LIVING SLEEPING
DAMPER DAMPER
Check for the following error messages:
Error Message No Communication
When the thermostat powers up, it will display the nC message
indicating it has not established communication with the Wiring Hub.
After about 10 seconds the thermostat will establish communication
with the Wiring Hub and the nC message disappears.
The nC message will appear anytime communication with the Wiring
Hub is lost or never established. Check the wiring between the
thermostat and Wiring Hub and that the wires are secured in the
correct terminals on the thermostat and Wiring Hub.
Upstairs
Airflow %
Auto
Downstairs
Day
Tu
AM
MENU
MODE
Error Message No Sensor
The thermostat displays the nS message indicating it has not detected
an upstairs temperature sensor. Check the wiring between the sensor
and Wiring Hub and that the wires are secured in the correct terminals
on the Sensor and Wiring Hub. If a wireless temperature sensor is
used, be sure the batteries are installed and the wireless sensor is set
to the correct number.
Upstairs
Airflow %
Auto
Downstairs
Day
Tu
AM
MENU
MODE
When an nS error is detected, the thermostat fully opens the Upstairs
and Downstairs dampers and turns airflow control off as long as the nS
error persists. It still maintains control of heating and cooling calls.
Error Message Wireless Sensor Lost
The thermostat displays the Err 01 or Err 02 message indicating it has
lost communication with an upstairs, wireless temperature sensor.
Check the batteries in the sensor and be sure they are set to the
correct sensor#. If the error message persists, turn the power off to the
Wiring Hub. When power is restored, the Wiring Hub automatically
detects which sensors are being used and clears the error messages.
When an Err 01 error is
detected, the thermostat
alternately displays
When an Err 02 error is
detected, the thermostat
alternately displays
2
Cool
Set To
Schedule
Inside
COOL
SYSTEM
AUTO
FAN
Cool
Set To
Schedule
Inside
COOL
SYSTEM
AUTO
FAN
Upstairs
Airflow %
Cool
Set To
Auto
Schedule
Downstairs
Inside
Day
Tu
MENU
MODE
COOL
SYSTEM
AUTO
FAN