eControls Comfort365 C365T21 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Termostat eControls Comfort365 C365T21. eControls Comfort365 C365T21 4 stron.
Również dla eControls Comfort365 C365T21: Podręcznik instalatora i użytkownika (13 strony), Podręcznik instalatora i użytkownika (13 strony)

Drukuj stronę

Error Messages

No Power Message

nP is displayed when there is

no power to the system. If the

message is displayed when

there is no interruption in

power to the home, contact

your HVAC contractor/builder.

Wiring from the thermostat to

the system needs to be

checked for errors.

Sensor Error Message

nS is displayed when there is

an error with the upstairs

sensor(s). If the message is

displayed, contact your HVAC

contractor/builder. The sensor

wiring needs to be checked

for errors.

When the nS message is

displayed, the thermostat will

continue to control the system but the airflow control will be disabled

until the sensor error is corrected.

Press the touchscreen with your fingertip only, using a

firm touch. Do not use a sharp object such as a pen or

pencil.

Set Time and Day

Touch here to change the

time and day of the week.

ENTER

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Inside

Day

MODE

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Inside

Day

MODE

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Inside

Day

MODE

CHANGE THE HOUR

Touch the UP/DOWN keys to change the

HOUR. Touch NEXT to save the hour and

go to change the minute.

CHANGE THE MINUTE

Touch the UP/DOWN keys to change the

MINUTE. Touch NEXT to save the minute

and go to change the day of the week.

CHANGE THE DAY OF THE WEEK

Touch the UP/DOWN keys to change the

DAY OF THE WEEK.

Touch ENTER to save the day of the

week and return to thermostat operation.

Set System Mode

Touch the SYSTEM key to display the SYSTEM MODES - OFF, HEAT,

COOL, or AUTO. When HEAT is selected, the heating setpoint is

displayed. When COOL is selected, the cooling setpoint is displayed. In

AUTO or OFF, the setpoint for the last system call is displayed.

COOL

Upstairs

SYSTEM

Airflow %

AUTO

Auto

Schedule

Downstairs

FAN

Day

MODE

Set Fan Mode

COOL

Touch the

FAN

key to display the FAN MODES - AUTO or ON. AUTO is

SYSTEM

the most commonly used setting.

AUTO

FAN

Upstairs

Airflow %

Auto

Schedule

Downstairs

Day

MODE

Set Thermostat Mode

Touch the

MODE

key to display the THERMOSTAT MODES -

SCHEDULE, HOLD and VACANT.

Upstairs

Airflow %

Auto

Schedule

Downstairs

Day

COOL

SYSTEM

AUTO

MODE

FAN

Displays the Mode.

Changing the Setpoint Temperature

The UP/DOWN keys are used to change the setpoint temperature.

Upstairs

Airflow %

Auto

Schedule

Downstairs

Day

MODE

To display the opposing system setpoint, touch the area shown below.

Upstairs

Airflow %

Auto

Schedule

Downstairs

Day

MODE

Touch and hold the SYSTEM key

to select:

Heat

OFF

Heating and cooling systems

Set To

are off.

HEAT

Inside

HEAT

Only heating calls are enabled.

SYSTEM

COOL

Only cooling calls are enabled.

AUTO

FAN

AUTO

Heating or Cooling calls are

enabled.

Touch FAN key to select:

Cool

AUTO

Fan is activated only during

Set To

heating or cooling calls.

Inside

COOL

SYSTEM

Fan is continuously on.

AUTO

FAN

Touch and hold the MODE key to select:

SCHEDULE

Cool

Setpoint temperatures are changed

Set To

at scheduled times defined by the user.

Inside

COOL

HOLD

SYSTEM

Setpoint temperatures are set by

AUTO

the user. No schedule is used.

FAN

VACANT

Setpoint temperatures are kept at the

vacant temperatures set by the installer.

Touch the UP key to raise setpoint

temperature.

Cool

Set To

Touch the DOWN key to lower setpoint

Inside

COOL

temperature.

SYSTEM

An active heating call is indicated by

AUTO

HEAT blinking. An active cooling call

FAN

is indicated by COOL blinking.

Touch here to display and change

Heat

the opposing setpoint temperature.

Set To

Touch the UP/DOWN keys to change the

Inside

COOL

setpoint temperature for the opposing

SYSTEM

system. The thermostat will return to

AUTO

displaying the active setpoint after about

FAN

30 seconds.