Yamaha ARIUS YDP-165 Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha ARIUS YDP-165. Yamaha ARIUS YDP-165 48 stron.
Również dla Yamaha ARIUS YDP-165: Skrócona instrukcja obsługi (2 strony), Midi Reference (4 strony)
Drukuj stronę
Turning the Power On
1.
Connect the plugs of the AC adaptor in
the order shown in the illustration.
YDP-165, YDP-S55
DC IN jack (page 10)
2
DC plug
1
AC adaptor
The shape of the plug and outlet differ depending on the
locale.
YDP-145, YDP-S35
DC IN jack (page 10)
1
DC plug
AC adaptor
Follow the order shown above in reverse when
disconnecting the AC adaptor.
WARNING
• Use the specified adaptor (page 41) only. The use of other
adaptors may result in irreparable damage to both the
adaptor and the instrument.
• When setting up the product, make sure that the AC outlet
you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn the power off and
disconnect the plug from the outlet.
• When using the AC adaptor with a removable plug,
- Make sure to keep the plug attached to the AC adaptor.
Using the plug alone can cause electric shock or fire.
- If the plug is accidentally removed from the AC adaptor,
never touch the metallic section when attaching the plug.
To avoid electric shock, short circuit or damage, also be
careful that there is no dust between the AC adaptor and
plug.
The shape of the plug and outlet differ depending on the locale.
AC outlet
3
Power cord
AC plug
AC outlet
2
Plug
Slide the plug
as indicated
2.
Turn down the [MASTER VOLUME]
knob to "MIN."
3.
Press the [P] (Standby/On) switch to
turn the power on.
The lamps on the buttons to the left of the keyboard
light up, and when they go out, the instrument starts
up.
The buttons to the left of
the keyboard go from lit
to unlit.
4.
Press the [P] (Standby / On) switch
again for 1 second to turn off the power.
The power indicator turns off.
CAUTION
Even when the [P] (Standby/On) switch is in the standby
status, electricity is still flowing to the instrument at a
minimum level. When not using the instrument for an
extended period of time, be sure to unplug the power cord
from the wall AC outlet.
NOTICE
Press only the [P] (Standby/On) switch when turning the
power on. Any other operations, such as pressing the keys,
buttons or pedals may cause the instrument to malfunction.
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual
Setting Up
The power lamp
lights up.
3
2
13