Yamaha ARIUS YDP-S35 Instrukcja obsługi - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha ARIUS YDP-S35. Yamaha ARIUS YDP-S35 48 stron.
Również dla Yamaha ARIUS YDP-S35: Skrócona instrukcja obsługi (2 strony), Midi Reference (4 strony)

Drukuj stronę

Appendix

Troubleshooting

Problem

Power suddenly and unexpectedly turns off.

The power of the instrument does not turn on.

A click or pop is heard when the power is

turned on or off.

Noise is heard from the speakers or

headphones.

The overall volume is low, or no sound is heard.

Pedals do not function.

The pitch and sound quality of the Piano Voice

is wrong in a specific key range.

Playing the keys produces a rattling noise.

The [+R] and [−L] lamps flash when this

product is started, when a Song is selected, or

when recording is finished.

YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual

Possible Cause and Solution

This is normal and the Auto Power Off function may have been activated

(page 14). If desired, disable the Auto Power Off function.

The plugs are not properly connected. Make sure that the DC plug is

securely inserted into the DC IN jack on the instrument, and that the AC

plug is securely inserted to the AC outlet (page 13).

This is normal when electrical current is being applied to the instrument.

The noise may be due to interference caused by the use of a mobile phone

in close proximity to this instrument. Turn off the mobile phone, or move it

further away from this instrument.

When you use the instrument along with the application on your smart

device, we recommend that you set "Airplane Mode" to "ON" on your smart

device in order to avoid noise caused by communication.

The Master Volume is set too low. Set it to an appropriate level using the

[MASTER VOLUME] knob (page 10).

Make sure a pair of headphones or conversion adaptor is not connected to

the [PHONES] jack (page 15).

The Speaker setting is "Off." Set the Speaker to "Normal" or "On" (page 15).

The Volume Limiter setting is "On".Set the Volume Limiter to "Off" (page 14).

Make sure that Local Control is On. For details, refer to the "MIDI

Reference" (page 8).

The pedal cord may not be securely connected to the [TO PEDAL] jack. Be

sure to insert the pedal cord all the way until the metal part of the cord plug

disappears from view (pages 36, 39).

This is no problem.

Yamaha develops the Piano Voices so that the original piano sound is

reproduced as faithfully as possible. This is why you may hear overtones

emphasized in a certain key range, or you may feel that the sound pitch or

quality is different from another key range.

This is no problem.

The keyboard mechanism of this product is designed to simulate the actual

noises of an acoustic piano. Such noises are produced even if you play an

acoustic piano.

This is no problem.

It is because the [+R] and [−L] lamps may flash when the internal

processing of this product is taking a long time. Note that no operations are

available while these are flashing.