Yamaha CH-500 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha CH-500. Yamaha CH-500 7 stron. Chimes; chimes stand
Również dla Yamaha CH-500: Instrukcja obsługi (6 strony)

Drukuj stronę

Damper Adjuster

Sound Column

Before you use

1 Never use a metal type hammer or mallets to

strike the sound column with. The sound column

will break.

2 Always use the instrument on a flat, level sur-

face. The instrument will not function properly on

a sloped surface.

3 When assembling the stand, make sure each part

is firmly attached, and there is no twisting or dis-

figurement in the frame. Also, make sure that all

wing nuts are firmly tightened.

4 Use your toes to operate the damper pedal. Do

not stand on or put your weight on the pedal.

Doing so may cause the pedal to break.

5 Do not touch the damper ad-

juster (shown in the illustration

left). The adjuster has been ad-

justed at the factory. Moving the

adjuster may result in the

damper not functioning prop-

erly.

6 When playing the chime, make sure the caster

brakes are firmly set and the chime stand does

not move about.

Hit the Head Plug when play-

ing the chime. Never hit the sound

Head Plug

column (pipe) with the hammer.

8 Do not keep the chime in a place where high tem-

peratures and high humidity are present. Doing so

will result in the shortening of the instruments life.

9 For regular cleaning, wipe with a soft, dry cloth.

Never wipe with thinner, or polishing preparations.

Be careful when transporting

1 When transporting or moving the instrument, do

not subject it to strong shocks

2 The sound column's pitch and/or tone may change

if the columns are scratched or bent. Be careful.

3 When the instrument is to be transported over long

distances, especially by vehicle, do so with the

sound columns removed from the stand. The shape

of the stand may change and the column's wire/

strings may be cut if the columns are not removed.

4 When attaching or removing the sound columns,

do so in a place where there is sufficient room so

that the columns do not come into contact with

other objects.

5 After the sound columns are removed, wrap them

in a soft cloth, etc., to prevent scratching, and

then transport.