Yamaha Clavinova CLP-152S Instrukcja obsługi - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha Clavinova CLP-152S. Yamaha Clavinova CLP-152S 29 stron. Yamaha piano owner's manual
Również dla Yamaha Clavinova CLP-152S: (francuski) Tryb zatrudnienia (29 strony)
MIDI Functions
In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal
way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha
DOU-10 Disk Orchestra Unit. In this mode the right-hand section of the keyboard is used to play an internal
Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator.
Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point," or the
key that divides the left- and right-hand sections of the keyboard can be set at any desired key.
HARPSI-
PIANO
CHORD
ORGAN
RECORDER
PLAY
REC
16
The MIDI split mode is useful if, for example, you want to play a piano
(Clavinova) voice with the right hand while playing a synthesizer bass line
or string section with the left hand.
When the MIDI split mode is activated, notes played on the left-hand
section are transmitted via the Clavinova MIDI OUT connector on MIDI
channel 2. Notes played on the right-hand section are transmitted on the
"basic channel" (i.e. the channel set using the MIDI channel selection func-
tion described previously).
Z
Press the [ORGAN] voice selector while holding down the [MIDI/
TRANSPOSE] button. The ORGAN LED will flash.
MIDI/
X
TRANSPOSE
While still holding the [MIDI/TRANSPOSE] button, press the key on
the keyboard at which you want to set the split point. The ORGAN
LED will light continuously. The split-point becomes the first key of
the left-hand section.
C
Release the [MIDI/TRANSPOSE] button.
V
To return to the normal full-keyboard mode, hold the [MIDI/TRANS-
POSE] button and press the [ORGAN] voice selector, then release both
buttons.
This function is used to transmit all data stored in the Recorder memory
to a MIDI data storage device such as the Yamaha DOU-10 Disk Orchestra
Unit, other sequence recorders, or MIDI compatible computers.
Z
MIDI/
Hold [MIDI/TRANSPOSE] and press the [PLAY] button. Transmis-
TRANSPOSE
sion will begin.
X
Release the buttons.
#