Yamaha Clavinova CLP-156 Instrukcja obsługi - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha Clavinova CLP-156. Yamaha Clavinova CLP-156 45 stron. Yamaha clp-156: owners manual

Drukuj stronę

MIDI Functions

INOVA

ONE

E. PIANO

MIDI/

TRANSPOSE

SPLIT POINT

Left-hand section plays

Right-hand section plays a

a Tone Generator bass

Clavinova piano voice.

voice.

The MIDI Split & Right Local OFF Mode

In the CLP-156 either the right- or left-hand section of the keyboard can be assigned to control an external

keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in

the previous section. To assign the right-hand section to external tone generator control while playing the

Clavinova voices with the left hand, press the [VIBES] voice selector instead of the [HARPSICHORD] voice

selector when activating the Split mode (see the preceding section). All other operations are exactly the same as

described in the previous section.

Transmitting the Panel Settings

This function causes all the current Clavinova control settings (selected voice, etc) to be transmitted via the

MIDI OUT terminal. This is particularly useful if you will be recording performances to a MIDI sequence re-

corder which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings

and recording them on the MIDI sequence recorder prior to the actual performance data, the Clavinova will be

automatically restored to the same settings when the performance is played back.

MIDI/

BES

TRANSPOSE

Factory Preset Recall

POWER

HARPSI-

Press the [HARPSICHORD] voice selector while holding down the

CHORD

[MIDI/TRANSPOSE] button. The HARPSICHORD LED will flash.

While still holding the [MIDI/TRANSPOSE] button, press the key on

the keyboard at which you want to set the split point. The HARPSI-

CHORD LED will light continuously. The split-point becomes the first

key of the left-hand section.

Release the [MIDI/TRANSPOSE] button.

To return to the normal full-keyboard mode, hold the [MIDI/TRANS-

POSE] button and press the [HARPSICHORD] voice selector, then

release both buttons.

Hold down the [MIDI/TRANSPOSE] button.

STRINGS

ORGAN

Press the [STRINGS] voice selector.

Release the [MIDI/TRANSPOSE] button.

All dual mode, reverb, brilliance, touch sensitivity, pitch control, and

individual key tune settings can be restored to their original factory preset

(default) values by holding the C7 key while turning the [POWER] switch

ON.

• When the power is turned ON the default split point key — F # 2 — will be

NOTE

automatically selected. If a new split point is selected it remains active

until the power is turned OFF or a different split point is selected.

• See page 39 for list of the panel settings transmitted by this function.

NOTE