Yamaha Clavinova CLP-157 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha Clavinova CLP-157. Yamaha Clavinova CLP-157 39 stron. Yamaha clavinova owner's manual

Drukuj stronę

Using the Recorder

The CLP-157 features a two-track recorder that lets you record what you play on the keyboard and then

play it back. Since you have two tracks, you can "overdub" one part on top of another, using a different

voice if you like, to create complex, rich-sounding recordings. The recorder feature is a useful adjunct to

any keyboard study program, since it lets you hear exactly how you sound from the listener's perspective.

It can also be just plain fun.

The recorder actually records the following data:

Parameters Recorded for Each track

Notes played

Dual balance

Sostenuto pedal

Brilliance

Engage the Record Ready

Mode

RECORDER

PLAY

REC

Select the Record Track

RECORDER

PLAY

REC

Make All Necessary Initial

Settings

PIANO 1

PIANO 2

PIANO 3

Start Recording

Voice selection

Dual mode voices

Damper pedal

Soft pedal

(not recorded as an initial setting)

Effect

Press the RECORDER [REC] button to engage the record ready mode

(recording does not actually start yet). The [REC] button indicator will

light and the rightmost beat indicator dot will flash at the current tempo.

When the record mode is engaged in the previous step, the last-recorded

track will automatically be selected for recording and its indicator — i.e.

the [1] or [2] button indicator — will glow red. If you want to record on a

different track, press the appropriate track button so that its indicator glows

red.

Before actually beginning to record, select the voice you want to record

with (or voices if you will be using the dual mode). You might also want to

set the volume and tempo controls.

CLAVINOVA

TONE

E. PIA

Recording will begin automatically as soon as you play a note on the

keyboard or press the [PLAY] button. The current measure number will

appear on the TEMPO display during recording.

Parameters Recorded for the Entire Song

Reverb type

Tempo

Recording

• You can record up to a maximum of about 4,200 notes (26 kilobytes)

NOTE

depending on pedal usage and other factors. The [REC] button and

record track indicators will begin to flash when the recorder memory is

almost full ("FUL" will appear on the TEMPO display) and recording will

stop automatically.

• The amount of remaining memory is displayed in kilobytes (approximate)

when the [REC] button is released, or when a record track button is

pressed as in step 2, below.

• The track button indicators of tracks which contain previously recorded

NOTE

data will glow green (unless the track is turned off as described below).

The previously-recorded data on the non-record track will normally be

played back as you record, so you can play along with a previously-

recorded track. If you don't want to hear the previously recorded track as

you record, press the playback track button before pressing the [REC]

button (step 1, above) so that its indicator goes out.

• Recording on a track which already contains data will erase all previous

data on that track.

• If the metronome was on when you started recording, you'll be able to

NOTE

keep time with the metronome while recording, but the metronome

sound will not be recorded.

Reverb depth

(initial setting only)