Yamaha Clavinova CVP-605 Instrukcja połączenia - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Instrument muzyczny Yamaha Clavinova CVP-605. Yamaha Clavinova CVP-605 16 stron. Iphone/ipad
Również dla Yamaha Clavinova CVP-605: Odniesienie (49 strony)
Drukuj stronę
Connection
Connecting with MIDI terminals or a [USB TO HOST] terminal
1
Turn off the power of the instrument.
Quit any open application software on your iPhone/iPad.
2
Connect your iPhone/iPad to the instrument.
For the proper order, carefully follow the indicated instruction steps for each connection type.
3
Turn on the instrument.
4
The connection procedures are completed at step 3. Use the application on your iPhone/iPad
to communicate with your instrument.
Some applications need the appropriate setting to communicate with the instrument. For details, refer to the
NOTE
relevant application manuals.
Operation with iOS 6 or later
Note that iPhone and iPad devices running iOS 6 or later may, on rare occasions, fail to recognize the i-MX1.
If this should occur, update the firmware of the i-MX1 to a new version according to the instructions in the attached PDF in the
Yamaha website i-MX1 product page.
Connecting with Wireless LAN via an Access Point
Required devices
• USB Wireless LAN Adaptor specified for your instrument (This is unnecessary if the wireless LAN function is included on the
instrument.)
• Access point with router (This is unnecessary if your modem has router capability.)
iPad
If the wireless LAN function is included on the instrument, skip steps 1 and 2 below.
1
Turn off the power to the instrument.
Quit any open application software on your iPhone/iPad.
2
Connect the USB Wireless LAN Adaptor to the [USB TO DEVICE] terminal of the instrument.
3
Turn on the power to the instrument.
4
If your instrument has a wireless LAN mode setting, set it to Infrastructure Mode.
For instructions on setting your instrument's wireless LAN mode, refer to the Owner's Manual or the Reference
Manual of your instrument.
5
Connect the instrument to the network.
There are three methods of connection:
• Automatic Setup by WPS
• Displaying the Networks in the Wireless LAN and Connecting to the Network
• Manual Setup
(page
Select the appropriate setup method from the above depending on your network environment.
iPhone/iPad Connection Manual
Access point
iPhone
Wireless LAN
(page
9)
11)
USB Wireless
LAN Adaptor
Wireless LAN
(page
10)
8