Yamaha CONCERTVIBRAPHONES YV1605J Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha CONCERTVIBRAPHONES YV1605J. Yamaha CONCERTVIBRAPHONES YV1605J 16 stron. Vibraphones
Również dla Yamaha CONCERTVIBRAPHONES YV1605J: Instrukcja obsługi (18 strony)
Drukuj stronę
Assembly
⁄3
Attach the round belt (fan belt)*.
Slip the round belt (fan belt) over the fan side pulley first, and then pull it over the flange of the driver
pulley.
*
Note For Service Personnel
If the belt cannot be mounted because the distance between the pulleys is too wide, or
the belt slips due to a too narrow pulley distance, loosen the two driver positioning
screws (see illustration below) to adjust the pulley distance (belt tension). Tighten the
screws securely after adjustment.
⁄4
Pedal Stroke Adjustment
Loosen the center rod fixing bolts to adjust the
protruding length of the center rod to the desired
pedal stroke, and retighten the bolts. The recom-
mended stroke (distance between pedal and floor)
is 9/16" to 13/16" (1.5 to 2 cm).
⁄5
After assembly, confirm that each bolt and screw is tightened securely.
28
Fan Side
Round Belt
(Fan Belt)
Pulley
* In case the belt is misplaced or worn, the following spare part may be ordered:
Round Belt
(Fan Belt)
Pulley
Part No.
Part Name
W5 128070
Fan Belt
9/16" ~ 13/16"
(1.5 ~ 2 cm)
Floor
Driver Side
Driver Positioning
Screws
Specification
3ØL236
Pedal