Yamaha DGB1KE3 Aktualizacja instrukcji - Strona 4

Przeglądaj online lub pobierz pdf Aktualizacja instrukcji dla Instrument muzyczny Yamaha DGB1KE3. Yamaha DGB1KE3 5 stron. Update manual

Insert the USB flash memory including the update program

into the USB port of the control unit.

USB flash memory

The update program is ready to be installed.

Update the firmware following the procedures in "Updating the

Disklavier" on page 4.

Updating the Disklavier

Update the Disklavier firmware using the update program you downloaded.

While holding [PLAY/PAUSE] on the control unit, press

[ON/OFF].

Hold

The current version information of each module appears one after

the other.

Make sure that the update program is prepared, then press

[ENTER] on the control unit.

The starting screen appears.

Press [ENTER] on the control unit again.

After a while, the update confirmation message of each module

appears.

English

USB port

CTRL system v2.20

*UPDATE

EW ITE SYSTEM P OG AM

(ENT)

v2.20



v3.00

MC -SURE?

(PLAY,STOP)

(ENT)

Updating the Disklavier

Note:

Depending on the version or

specification of the Disklavier, the

actual indications for the version and

module names may differ from ones

depicted here.

Continued on next page