Yamaha Electone D-85 Podręcznik - Strona 21

Przeglądaj online lub pobierz pdf Podręcznik dla Instrument muzyczny Yamaha Electone D-85. Yamaha Electone D-85 36 stron. Electone organ
Również dla Yamaha Electone D-85: Podręcznik użytkownika (37 strony), Podręcznik (36 strony)

Drukuj stronę

started, all the bars from the first are automati-

cally played in the sequence in which they were

stored

in the

memory.

At the end

of the

sequence, the rhythm starts again at the first bar

and this operation is repeated until the rhythm is

stopped.

Continuous program play is possible.

The program

play can be made continuous by

depressing two or more of the program 1, 2 and

3 buttons and starting the rhythm.

The order of play starts with the lowest program

number.

If program selectors 1, 2 and 3 are all

depressed at the same time and play started, a

total of 128 bars (32 + 32 + 64 = 128) in the

program will be played through continuously.

The

Digital

Display

does

not

show

the

cumulative bar count.

It will count up to 32

or 64 and then once the program is switched

over, it will return immediately to "1".

NORMAL 8 BAR 16 BAR

PROGRAM

Break Variations While Playing Your Program

While playing your program, if you press the break

variation ON button the rhythm of the phrase in the

memory

will be cancelled and replaced by the break

variation.

The break variation pattern at this time will change,

according to the type of rhythm you have memo-

rized, to 3/4, 12/8 or 4/4 time.

Checking the contents of the program

(1)

(2)

(3)

Depress

the PROGRAM

button

(1, 2 or 3)

corresponding

to the program

which

is to be

checked.

Depress the CHECK button at the top left.

The Digital Display display remains fixed at [

If the rhythm is now started the first bar stored

in the memory is played.

If the FORWARD

button is now depressed, the

next bars can be checked in sequence.

* Once all the bars which have been stored have

been played, [E] appears on the Digital

Display indicating that no more bars can be

checked.

Depress the BACK

button to return to the bar

before during checking. It is possible to return to

any previous bar by depressing the button for the

required number

of times. Depress the RESET

button upon return to the first bar.

Note:

The

program

stored

in the memory

is not

erased even

when the CHECK

and RESET

buttons are depressed. When a new program is

stored in the memory, the previous program is

automatically erased and replaced by the new

program. A program stored in the memory is

not erased when the power is switched off.

Dealing with program errors

(1)

(2)

(3)

Depress the BACK button and monitor the bars

the Digital

Display

until

the error

bar is

reached.

Select

the

correct

rhythm

and

then

simply

depress the RECORD button.

Upon completion of the correction depress the

FORWARD button to advance the rhythm to the

correctly

stored

bar

and

then

continue

the

memory operation.

Changing programs in the memory

(1)

(2)

(3)

Locate the bar which is to be changed following

the program check procedure.

Now depress the program ON button.

Select and set the new rhythm and the change is

completed as soon as the RECORD

button is

depressed.

For continuous changes, repeat the

recording

procedure.

change

other

bars,

locate

them

with

the FORWARD

and BACK

buttons and repeat the recording procedure.

Once

the changes

have

been

made,

set the

RECORD

and CHECK

buttons to OFF. (Check

that the RECORD lamp goes off.)