Yamaha PortaTone PSR-2000 Szybkie kroki - Strona 17
Przeglądaj online lub pobierz pdf Szybkie kroki dla Instrument muzyczny Yamaha PortaTone PSR-2000. Yamaha PortaTone PSR-2000 28 stron.
Również dla Yamaha PortaTone PSR-2000: Instrukcja serwisowa (19 strony)
Drukuj stronę
b) Use the [C] '^' and [D] 'v' buttons to select a Part.
5) To record multiple Channels/Parts simultaneously, repeat steps 2 – 4.
6) To start recording, begin playing the keyboard, or press the silver
[START/STOP] button in the 'SONG' section of the front panel.
NOTE: When recording Auto Accompaniment Parts from a Style, it is a good idea
to turn ON the [INTRO] button and [SYNC. START] button first (red LED
illuminates on both), and then play the chords for the Style to trigger the
recording. This way the Song will have a more professional sounding
introduction.
7) To stop recording, press the [REC] button. If recording a Style, the
[ENDING/rit.] button can also be used for a professional sounding ending.
8) Play back the recording:
a) Press the [TOP] button.
b) Press the silver [START/STOP] button to start the Song.
c) Press the silver [START/STOP] button again to stop the Song.
9) To record additional Parts, repeat steps 2 – 8.
Saving the Song:
Once a Song has been recorded, it can be saved to the 'USER' memory, or to
the 'FLOPPY DISK' memory.
1) Press the [A] 'SONG' button.
2) Use the [BACK] and [NEXT] buttons to select the 'USER' memory page or the
'FLOPPY DISK' memory page.
3) Press the '6' [v] 'SAVE' button.
4) Use the '1' - '8' [^] and [v] toggle buttons to name the Song.
5) Press the '8' [^] 'OK' button to save the Song to the memory location chosen
in step 2.
Owner's Manual, p. 92-95