Yamaha PORTATONE PSR-500M Instrukcja obsługi - Strona 25
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha PORTATONE PSR-500M. Yamaha PORTATONE PSR-500M 46 stron.
Drukuj stronę
FEATURE REFERENCE (voice)
А
eee eee eee
se
ы ы арнала
ЕЕ cre]
€ THE SPLIT MODE
€ REVERB DEPTH
The PSR-500M SPLIT mode — selected via the
[MODE] button — allows you to play two voices at once:
one with the left hand and one with the right. The left-
hand voice can be played to the left of the "split point,"
set as described in "SPLIT POINT CHANGE" on page
13, and the right-hand voice can be played to the right of
the split point.
When the SPLIT mode is first selected the current voice
is assigned to the right-hand keys. The right-hand voice
number will be shown on the right two digits of the
MULTI DISPLAY, and the left-hand voice number will
appear on the left two digits of the MULTI DISPLAY
when a key to the left of the split point is pressed for
about 2 seconds (the "SPLIT VOICE" dot in the display
also will light).
MODE
ONORMAL
eseur
STYLE / SPLIT VO
vol
олы
алгі
22765240
а я. LI L і
STE
SPLITVOKE
BEAT
Changing the Right and Left-hand
Voices
To change the right-hand voice press a key to the right
of the split point, then select the new right-hand voice in
the normal way.
To change the left-hand voice press a key to the left of
the split point, then select the new left-hand voice in the
normal way.
See ONT:
^ —
VOICE SELECT
0000
ОТ
Q
©
©
©
A
VOO
* When the SPLIT MODE is used with the DUAL VOICE function
(see page 23) different dual voices can be assigned to the left-
and right-hand sections of the keyboard. Press a key to the right
of the split point to select the right-hand voice, then turn DUAL
VOICE on and select the right-hand dual voice. Press a key to
the left of the split point to select the left-hand voice, then turn
DUAL VOICE on and select the left-hand dual voice.
The depth of the selected DSP effect can be increased
or decreased for the selected voice by using the REVERB
DEPTH [Å] or [V] button. The reverb depth range is
from 0 (no effect) to 15 (maximum reverb depth). The
reverb depth is shown on the MULTI DISPLAY while the
REVERB DEPTH [A] or [V] button is held, and for ap-
proximately 2 seconds after either REVERB DEPTH
button is released. Pressing both the REVERB DEPTH
[A] and [V] buttons simultaneously immediately selects
reverb depth value 6.
STYLE LSPLIT VOICE
vOICE.
A
7
TE
-
0-15
* No effect is produced when the reverb depth is set to 0. From
settings 1 to 8 the original sound is maintained at the same level
while the level of the effect sound is increased. From settings 9
to 15 the effect level is maintained while the level of the original
sound is reduced.
* In the SPLIT mode the left-hand voice reverb depth can be
adjusted after playing a left-hand key and the right-hand voice
reverb depth can be adjusted after playing a right-hand key.
@ VOLUME
Although the MASTER VOLUME control can be used
to set the overall volume level, the VOLUME [A] and
[V] buttons can be used to adjust the volume of the se-
lected voice in relation to all other sound produced by the
PSR-500M — i.e. accompaniment, song memory, etc.
Press the [A] button to increase the volume, or the [W]
button to decrease the volume. The selected volume level
will be displayed on the MULTI DISPLAY while the
volume is being adjusted, and for approximately 2 sec-
onds after either VOLUME button is released.
/, \
SIY.E/SP.TVOICE — voice
VOLUME
I
—
STYLE
ЗРИТУОКЕ
BEAT
0-24
The volume range is from 0 to 24, with 0 producing no
sound while 24 is the highest volume. The default volume
value (21) can be recalled at any time by pressing both the
VOLUME [A] and [V] buttons at the same time.
+ In the SPLIT mode the left-hand voice volume can be adjusted
after playing a left-hand key and the right-hand voice volume can
be adjusted after playing a right-hand key.