Yamaha SILENT Bass SVB-100 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha SILENT Bass SVB-100. Yamaha SILENT Bass SVB-100 18 stron.

■ About the End Pin

Loosen the end pin stopper, extend the

end pin to a comfortable length for playing

and firmly tighten the end pin stopper.

• Make sure the end pin stopper is secured firmly to

prevent the instrument from falling while you play.

■ Putting the Bass into the Optional Soft Case

Before putting the bass into the optional SILENT Bass™ soft case, remove the frame

unit from the SILENT Bass™ and pack the components into the case as shown in the

diagram below.

• Use the Velcro® fasteners (2 locations) inside the case to secure the frame unit in place.

• When putting the bow in the soft case, make sure that it is first put into the hard bow case, then place

the hard case in the pocket and secure with a Velcro® fastener (1 location).

• When the case is placed on its side with the instrument packed inside, make sure that the side holding

the main unit is placed on the bottom (so the side with the frame is on top).

SILENT Bass™ Main Unit

Frame Unit

The soft case does not fully protect parts such as the bridge from damage.

The soft case is meant for storing and transportation of the instrument and protects it from dust, etc.

Do not place the bridge so it is on the bottom of the case and do not cause damage to the instrument

by placing objects on top of the case, hitting it, etc.

Hard Bow Case

Bow Pocket

Velcro® Fasteners

Tighten

Loosen

End Pin Stopper

End Pin