Yamaha Silent Violin SV150S Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha Silent Violin SV150S. Yamaha Silent Violin SV150S 19 stron. Yamaha silent violin owner's manual

Yamaha Silent Violin SV150S Instrukcja obsługi

■ Using the Built-In Metronome

* The built-in metronome operates even if the instrument is not connected to the Control Box, and
can be heard through the stereo inner earphones or through the LINE OUT jack.
1
Press the METRONOME button on the Control Box to call
up the display shown at the right.
2
Press the METRONOME button to select the item you want
to set in the display, then use the +/– buttons to set the
value.
* Holding the + or – button changes the value continu-
ously. Also, pressing the + and – buttons simulta-
neously reverts the value to its factory default value.
q=
Sets the quarter note tempo (32-280). The
default value is 120.
Beat:
Sets the beat (0-7 beats, 8-beat, triplet, 16-
beat). The default value is 4-beat.
Volume: Sets the volume level (0-30). The default value
is 20.
3
Press the ENTER button to start the metronome. Press the
button again to stop the metronome.

■ Using the Built-In Effects

The SV150 Silent Violin™ features a built-in DSP (Digital Signal Processor) that can be used
to add any of the processor's 24 effects including reverb to make playing more enjoyable.
1
As described in the previous "Sound Output Basics" sec-
tion, connect the instrument to the Control Box and make
the proper settings.
2
Press the SOUND button on the Control Box to call up the
display shown on the right.
3
Using the + and – buttons, select an EFFECT (No. 1-25)
* Effect "No. 25 No Effect" switches the effect OFF.
If a parameter appears below the effect name, press the
SOUND button to select the parameter, then use the +/–
buttons to set the parameter value.
* Holding the + or – button changes the value continu-
ously. Also, pressing the + and – buttons simulta-
neously reverts the value to its factory default value.
12
Tempo
Volume
Effect name
Effect No.
Parameter: Selected Value
Beat