Yamaha SilentBrass Pickup Mute PM7 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha SilentBrass Pickup Mute PM7. Yamaha SilentBrass Pickup Mute PM7 9 stron. Yamaha silent brass owner's manual
Również dla Yamaha SilentBrass Pickup Mute PM7: Instrukcja obsługi (9 strony)
Drukuj stronę
QUICK GUIDE
Attaching and removing the
PM9/PM7/
Pickup Mute
™
PM6/PM5/PM3
As shown in the illustration, hold the
instrument with your left hand and, while
turning the Pickup Mute ™ , firmly insert it
into the bell with your right hand.
Attaching the
Pickup Mute
to the
Euphonium
For Euphoniums,
with the bell fac-
ing up, hold the
PM2 by its handle
in your right hand
and firmly insert it
into the bell.
16
■ Attach the Pickup Mute
1.
After assembling the PM1 (refer to
pg. 15) lay it on its side.
While seated, hold the tuba
between your legs. Hold the PM1
by its handle and lift it up.
™
4.
Attach the PM1 fixing hooks
to the bell. If necessary, adjust
the length (tension) of the hook
belt.
™
PM1 to the Tuba
2.
Holding the PM1 with both hands,
gently insert the Inner Head into
the bell of the tuba. (Continue
holding the tuba between your
legs.)
5.
Connect the lock nut equipped
end of the supplied cable to the
PM1's output jack and secure
the lock nut.
3.
Adjust the PM1 so that it is posi-
tioned in the center of the bell.
* Noise will result if the Inner Head
is touching the bell.
After removing the PM1 from
the instrument, lay the PM1 on its
side. If the PM1 is stood vertically,
the Inner Head will collapse causing
a burst of noise in the earphones that
may result in hearing impairments.
When putting the PM1 away, hold
the Inner Head with both hands and
gently collapse it back into the Body.
Strongly dropping the Inner Head may
result in damage to the PM1.