Yamaha TP3326 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha TP3326. Yamaha TP3326 12 stron. Tp3300 series pedal timpani
Drukuj stronęInitial Preparation
Your Yamaha timpani is equipped with a plastic head carefully mounted and adjusted at the factory.
However, new heads tend to stretch during shipping and storage, so it may be necessary to re-tune the
instrument before using. Please perform the following steps to check and, if necessary, readjust your
instrument.
1
The area between the kettle edge and the inner
circle of the counter hoop is called the collar.
Please make sure that the width of this collar is
uniform, as shown in the illustration titled "Correct" .
Correct
Kettle
Counter
edge
Collar
hoop
If collar width is not uniform, fully depress the
heel end of the pedal. While holding the pedal
in this position, realign the head and hoop as
shown in the "Correct" illustration.
Caution
Never place your fingers or foot into the mov-
ing parts or the space under the pedal or
base.
Serious injury can result if fingers or feet be-
come pinched.
6
Wrong
Kettle
Counter
edge
Collar
hoop
2
Fully depress the heel end of the pedal. While
holding the pedal in this position, use the sup-
plied tuning key to tighten the tuning bolts one by
one ¼ of a turn (90°) in the order shown in the
illustration below.
It is very important that all tuning bolts be
turned the same amount.
Tuning key
29" , 32"
3
Take your foot off the pedal.
• Heel still moves up
→ Repeat steps
• Heel stays down
4
→ Go to step
23" , 26"
2
through
3
.
.