Yamaha YDP-88II Instrukcja obsługi - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha YDP-88II. Yamaha YDP-88II 30 stron. Yamaha digital piano owner's manual

Drukuj stronę

MIDI Data Format

If you're already very familiar with MIDI, or are using a com-

puter to control your music hardware with computer-generated

MIDI messages, the data provided in this section can help you

to control the YDP-88II.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)

kk = Note number

Transmit: 15 ~ 114 = D#-1 ~ F#7

Receive: 21 ~ 108 = A-1 ~ C7

vv = Velocity (Key ON = 1 ~ 127. Key OFF = 0)

Data format: [8nH] -> [kk] -> [vv]

8nH = Note OFF event (n = channel number)

kk = Note number

Transmit: 15 ~ 114 = D#-1 ~ F#7

Receive: 21 ~ 108 = A-1 ~ C7

vv = Velocity (Key OFF = 0 ~ 127)

* 8nH (note off) is receive only.

9nH (vvH=00H) used for transmission.

2. CONTROL CHANGE & MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)

cc = Control number

vv = Control value

CONTROL

VALUE [vv]

07H Volume

00H : -

(reception only) 6FH : -3dB

7FH : 0dB

0AH Panpot

00H ~ 17H : Left 6

(reception only) 18H ~ 1FH : Left 5

20H ~ 27H : Left 4

28H ~ 2FH : Left 3

30H ~ 37H : Left 2

38H ~ 3FH : Left 1

40H ~ 47H : Center

48H ~ 4FH : Scaling pan

50H ~ 57H : Right 1

58H ~ 5FH : Right 2

60H ~ 67H : Right 3

68H ~ 6FH : Right 4

70H ~ 77H : Right 5

78H ~ 7FH : Right 6

0BH Expression

00H : -

(reception only) 6FH : -3dB

7FH : 0dB

40H Damper

00H ~ 3FH : OFF

Pedal

40H ~ 7FH : ON

42H Sostenuto

00H ~ 3FH : OFF

Pedal

40H ~ 7FH : ON

43H Soft Pedal

00H ~ 3FH : OFF

40H ~ 7FH: ON

78H All Sound OFF (reception only)

79H Reset All Controller (reception only) 00H

7AH Local Control ON/OFF

(reception only)

7BH All Notes OFF (reception only) 00H

7CH Omni OFF/All Notes OFF

(reception only)

7DH Omni ON/All Notes OFF

(reception only)

3. PROGRAM CHANGE

Data format: [CnH] -> [pp]

CnH = program event (n = channel number)

pp = Program number

pp VOICE NAME

00 PIANO

01 E. PIANO1

02 E. PIANO2

4. SYSTEM REALTIME MESSAGES

[rrH]

rr= Control

F8H: Timing clock

FAH: Start

FCH: Stop

FEH: Active sensing

Data Transmission

F8H Transmitted every Received as 96-clock

96 clocks

FAH Recorder start

FCH Recorder stop

FEH Transmitted every All notes are turned

200 milliseconds

* Caution: If an overrun framing error occurs the

Damper, Sostenuto, and Soft effects for all channels

are turned off and an All Note Off occurs.

5. SYSTEM EXCLUSIVE MESSAGES

(1) YAMAHA MIDI Format

Data format: [F0H] -> [43H] -> [xnH] -> [ff] ... [F7H]

43H : Yamaha

xn : Substatus + channel number.

ff : Format number.

x ff

Information

0 7CH Panel Data receive.

2 7CH Panel Data Send occurs when this data received.

2 7DH Name Data Send occurs when this data received.

* This message is effective only when the channel

number "n" is set to the same as the YDP-88II

receive channel number.

PANEL DATA SEND FORMAT

F0H, 43H, 0nH, 7CH, 00H, 1BH (n: channel number)

53H, 4BH, 20H, 20H

43H, 4CH, 50H, 27H, 39H, 34H

3xH, 3yH

[PANEL DATA]

[CHECK SUM (1byte)] = 0-(53H+4BH+20H+...+Data end)

F7H

• Panel Data Contents

00H

(1) VOICE

(2) DUAL VOICE

00H : OFF

(3) DUAL ON/OFF

7FH : ON

(4) DUAL BALANCE

(5) 0

00H

(6) 0

(7) 0

00H

(8) 0

(9) 0

(10) 0

(11) 0

(12) SPLIT POINT

(13) 0

(14) Absolute tempo low byte

(15) Absolute tempo high byte

VOICE NAME

HARPSICHORD

SEQUENCE DATA FORMAT

ORGAN

F0H, 43H, 73H

38 H

06H

02H

03H, 0FH, 0AH, 02H (Data length= wxyzH 0x1fd1*2 bytes)

[PANEL DATA]

[CHECK SUM (1byte)] = 0-sum (BULK DATA)

F7H

MODEL ID CODE SEND FORMAT

F0H, 43H, 0nH, 7DH, 00H, 10H (n: channel number)

53H, 4BH, 20H, 20H

43H, 4CH, 50H, 27H, 39H, 34H

3xH, 3yH, 20H, 20H, 20H, 20H (x, y: version number)

[CHECK SUM (1byte)] = 0-(53H+4BH+20H+......+20H)

F7H

Reception

tempo timing when

MIDI clock is set to

External

Recorder start

Recorder stop

off if no data is

received for more than

400 milliseconds

(SK)

(x, y: version number)

(Product ID)

(Bulk ID)

(Bulk number)

(Sequence data)

] (Model ID)

(2) YDP-88II MIDI Format

Data format: [F0H] -> [43H] -> [73H] -> [38H]

-> [yy] -> [F7H]

43H : Yamaha ID

73H : ] Model ID

38H :

: Substatus

Information

02H Internal MIDI clock.

03H External MIDI clock.

13H Multi-timbre mode OFF.

15H Multi-timbre mode ON.

61H MIDI FA cancel ON.

62H MIDI FA cancel OFF.

7cH All notes OFF; receive channel = c+1; omni OFF.

* When yy=2, 3, 13, 15 or 7c, YDP common ID

(01H) is recognized as well as 73H, 38H.

* All Control Change values are reset when [13H] or

[15H] is received. All voices and other parameters

are also reset when [15H] is received in order to

ensure the same initial settings.

* When [61H] is received, playback will not start

when "start" (FAH) is received. However, "stop"

(FCH) and the "timing clock" (F8H) will not be

affected. Use [62H] to cancel this function.

(3) Special Control

Data format: [F0H] -> [43H] -> [73H] -> [38H]

-> [11H] -> [0nH] -> [cc] -> [vv] -> [F7H]

43H : Yamaha ID

73H : ] Model ID

38H :

11H : Special control

0nH : Control MIDI change + channel number

: Control number

: Value

Control

Value [vv]

08H Dual Balance 00H : Left Voice Max.

7FH : Right Voice Max.

1BH Metronome

00H : Off

(reception only) 01H : On

5AH Dual Mode

00H : Dual Off

01H : Dual On (Normal)

02H : Dual On (Left voice 1

octave up)

03H : Dual On (Right voice 1

octave up)

5CH Dual Voice

[vv] : Dual Voice

(4) Absolute Tempo

Data format: [F0H] -> [43H] -> [73H] -> [xx]

-> [11H] -> [1nH] -> [cc] -> [dd] -> [F7H]

43H : Yamaha ID

73H : ] Model ID

38H :

11H : Special control

1nH : Control MIDI change

(Transmit: n=control channel number)

(Receive: any channel OK)

ccH : Absolute tempo low byte

ddH : Absolute tempo hight byte

Tempo=dd*128+cc