Yamaha YM-4600A Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha YM-4600A. Yamaha YM-4600A 14 stron. Concert marimbas
Również dla Yamaha YM-4600A: Instrukcja obsługi (12 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

ASSEMBLY

Set the tone bars.

5-1. Set the natural tone bars first.

With one person holding the suspension cords on the bass side and the other holding the suspen-

sion cords on the treble side securely with both hands, gently place the tone bars on the rails. Align

each tone bar individually and hook its cord onto the corresponding post. After confirming that the

cord is secured to every post, fix the tone bars by pulling the right and left cords forward from the

large end side and hooking the two springs into each other.

* When setting the tone bars, use care not to cause any damage to them.

Small end

YM-5100A/4900A Only

5-2. Each of F#

bar, move the resonance regulator to find the position where the best resonance is obtained and fix

it there.

* When fixing the resonance regulator, check to ensure that it is not aslant.

Suspension cord

Post

, G

, G#

and A#

24,

resonators has a resonance regulator. While tapping each tone

Resonance regulator

Large end

Suspension cord