Yamaha YV-3700 Instrukcja obsługi - Strona 27
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha YV-3700. Yamaha YV-3700 28 stron. Concert vibes
Również dla Yamaha YV-3700: Instrukcja obsługi (28 strony)
13
Adjust the pedal stroke. (Refer to YV-3910/3710/3700 assembly step 10-1 on page 17.)
14
After assembly, confirm that each bolt and screw is tightened securely.
15
Height adjustment should always be performed by at least 2 persons.
To adjust the height of the tone bars, first remove the round belt (fan belt), driver, controller and tone
bars*, and loosen the center rod fixing bolts. (* To remove the tone bars, disengage the springs on the
low sound side, and then unhook the string from the post.)
Support both frame ends by hand (do not touch the metal parts shown in the illustration), and loosen
the slide leg fixing bolts.
Lift the frame ends to the desired height and then securely tighten each slide leg fixing bolt, aligning
it with the corresponding notch of the slide leg. Bolt and notch are aligned when the next higher notch
is flush with the upper leg flange. (Refer to step
16
This completes the assembly of the instrument.
To play, connect the supplied AC adapter to the DC 12V IN jack of the controller. (Refer to YV-3700
assembly procedure, "Power Supply", on page 19.)
Frame
Do not touch !
When a slide leg fixing bolt is tightened in between two
notches, there is a danger of the slide leg slipping.
Always make sure that the slide legs are held securely.
ASSEMBLY : YV-2700/2700G/1600A/520
For height adjustment, make
sure to support the instrument
by the wooden frame. Do not
touch the metal parts.
,
on page 23.)
25