Yamaha CDX-E410 Podręcznik - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik dla Odbiornik Yamaha CDX-E410. Yamaha CDX-E410 45 stron. Micro component system mcr-e410 cd player
Również dla Yamaha CDX-E410: Instrukcja serwisowa (32 strony)

Drukuj stronę

Connecting the speaker cable

Notes

• Be sure to connect the left channel (L), right channel (R), "+"

(red) and "–" (black) properly. If the connections are faulty, no

sound will be heard from the speakers, and if the polarity of the

speaker connections is incorrect, the sound will be unnatural

and lack bass.

• Do not let the bare speaker wires touch each other or do not let

them touch any metal part of the receiver. This could damage

the receiver and/or the speakers.

• When connecting another speaker set instead of the NX-E800,

be sure to use speakers with the specified impedance shown on

the rear panel of the receiver and magnetically shielded. In case

the magnetically shielded speakers interfere with the monitor,

place the speakers away from the monitor.

Remove approximately 10 mm (3/8 in) of

insulation from the end of each speaker

cable and then twist the exposed wires of the

cable together to prevent short circuits.

10 mm (3/8 in)

Unscrew the knob.

Insert the bare wire into the terminal.

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

Tighten the knob to secure the wire.

Connecting the System

Red: positive (+)

Black: negative (–)